Product Description
Technical data:
1,output torque:200-50000(N.m)
2,rated power:0.18-200(kw)
3,input speed:≤1500 (rpm)
4,output speed:≤280(rpm)
5,transmission ratio:≥5.36
6,series:3
7,install form:M1-M6
8,Model no. :K/KA/KF/KAF/KH/KHF(37/47/57/67/77/87/97/107/127/157/167/187)
Other
1,Driving in a variety of forms: motor straight league, user with motor, pulley, wheel drive, couplings straight league drive, the handwheel device etc
2,Output in a variety of forms: can hollow shaft output and CHINAMFG shaft output, hollow shaft flange and CHINAMFG shaft flange, hollow shaft torque arm type, CHINAMFG shaft torque arm type, etc
3,Installed in a variety of forms: can base mounting, flange installation, torque arm installation, etc
| Type | 37 | 47 | 57 | 67 | 77 | 87 | 97 | 107 | 127 | 157 | 167 | 187 |
| Structure form | K KA KF KAF KAZ KAT KAB | |||||||||||
| Input power(KW) | 0.18-3 | 0.18-3 | 0.18-5.5 | 0.18-5.5 | 0.37-11 | 0.75-22 | 1.1-30 | 3-45 | 7.5-90 | 11-160 | 11-200 | 18.5-200 |
| Transmission ratio | 5.36-106.38 | 5.81-131.87 | 6.57-145.14 | 7.14-144.79 | 7.24-192.18 | 7.19-197.37 | 8.95-176.05 | 8.74-1410.46 | 8.68-146.07 | 12.65-150.41 | 17.28-163.91 | 170.27-180.78 |
| Allowable torque(N.m) | 200 | 400 | 600 | 820 | 1550 | 2700 | 4300 | 8000 | 13000 | 18000 | 32000 | 50000 |
| Weight(kg) | 11 | 20 | 27 | 33 | 57 | 85 | 130 | 250 | 380 | 610 | 1015 | 1700 |
Product Description
-K Series Helical Bevel Gearbox
K series gear reducer, manufactured according to international technical requirements, has a high scientific and technological content; Space saving, reliable and durable, high overload capacity, power up to 132KW; Low energy consumption, superior performance, reducer efficiency up to 95%
It is designed and manufactured on the basis of module combination system. There are a lot of motor combinations, installation forms and structural schemes. The transmission ratio is classified carefully to meet different operating conditions and realize electromechanical integration.
High transmission efficiency, low energy consumption and superior performance.
Reinforced high rigid cast iron box; The hardened gear is made of high-quality alloy steel. Its surface is carburized, quenched and hardened, and the gear is finely ground. It features stable transmission, low noise, large bearing capacity, low temperature rise, and long service life. Performance and characteristics:
1. The gear is carburized and quenched with high-quality alloy, the hardness of the tooth surface is up to 60 ± 2hrc, and the grinding accuracy of the tooth surface is up to 5-6
2. The computer modification technology is used to pre modify the gear, which greatly improves the bearing capacity of the reducer
3. Complete modular structure design is adopted from the box to the internal gear, which is suitable for large-scale production and flexible selection
4. The standard reducer models are divided according to the form of decreasing torque. Compared with the traditional equal proportion division, they are more in line with customer requirements and avoid power waste
5. It is designed and manufactured by cad/cam to ensure the stability of quality
6. Multiple sealing structures are adopted to prevent oil leakage
7. Multi directional noise reduction measures to ensure the excellent low noise performance of the reducer
8. The installation mode of Liyi products is flexible, which makes it easy for customers to choose K57 reducer, K67 reducer, K77 reducer, K87 reducer, K97 reducer, KA87 reducer, KA97 reducer, KA107 reducer, KA127 reducer
Product Features
1. Input mode: Coupled motor, belted motor, input shaft or connection flange.
2. Output: Right angle
3. Compact structure. Rigid tooth face. Carrying greater torque, high loading capacity.
4.High precision gear, ensuring the unit to operate stably, smooth transmission.
5. Low noise, long lifespan. Large overlap coefficient, abrasion resistant.
Our process of production
Our product line
| Hardness: | Hardened Tooth Surface |
|---|---|
| Installation: | 90 Degree |
| Layout: | Expansion |
| Gear Shape: | Bevel Gear |
| Step: | Single-Step |
| Type: | Gear Reducer |
| Samples: |
US$ 1000/Piece
1 Piece(Min.Order) | |
|---|
editor by CX 2023-09-13
China high quality High Precision Helical Worm Speed Reducer Gear Motor Gearbox cvt gearbox
Product Description
High Precision Helical Worm Speed Reducer Gear Motor Gearbox
|
Input Configurations |
Direct motor coupled |
|
With IEC B5/B14 motor flange |
|
|
With IEC B5/B14 motor mounted |
|
|
With CHINAMFG input shaft |
|
|
Output Configurations
|
Solid output shaft |
|
Solid output shaft with flange |
|
|
Hollow output shaft |
|
|
Hollow output shaft with flange |
|
|
Variants of the Helical Worm Gear Unit Series S / SF / SA / SAF |
Foot- or flange-mounted |
|
B5 or B14 flange-mounted |
|
|
Solid shaft or hollow shaft |
|
|
Hollow shaft with keyed connection, shrink disk, splined hollow shaft, or Torque Arm |
Main Feature
The simple design makes for cost-effectiveness. Use the S series gear units to implement simple tasks in your machine or plant applications. The linear power transmission makes the helical-worm gear units especially quiet in operation. The combination with a helical gear stage significantly increases the efficiency compared to pure worm gear units.
Specification
|
Model |
Shaft Dia. mm |
Horizontal Center Height mm |
External Flange Dia. mm |
Power (kw) |
Ratio (i) |
Nominal Torque (Nm) |
|
|
Solid Shaft |
Hollow Shaft |
||||||
|
S/SF/SA/SAF37 |
ф20 |
ф20 |
88 |
0.12-0.55 |
24-204 |
100 |
|
|
S/SF/SA/SAF47 |
ф25 |
ф30 / ф25 |
100 |
160 |
0.18-0.75 |
24-204 |
150 |
|
S/SF/SA/SAF57 |
ф30 |
ф35 / ф30 |
112 |
200 |
0.75-1.5 |
24-204 |
250 |
|
S/SF/SA/SAF67 |
ф35 |
ф45 /ф40 |
140 |
200 |
0.75-3 |
24-285 |
460 |
|
S/SF/SA/SAF77 |
ф45 |
ф60 / ф50 |
180 |
250 |
0.75-7.5 |
24-385 |
1200 |
|
S/SF/SA/SAF87 |
ф60 |
ф70 / ф60 |
225 |
350 |
1.1-11 |
24-389 |
2000 |
|
S/SF/SA/SAF97 |
ф70 |
ф90 / ф70 |
280 |
450 |
1.5-18.5 |
24-389 |
3500 |
Company profile
Scenario
Packing
FAQ
Q1: I want to buy your products, how can I pay?
A: You can pay via T/T(30%+70%), L/C ,D/P etc.
Q2: How can you guarantee the quality?
A: One year’s warranty against B/L date. If you meet with quality problem, please send us pictures or video to check, we promise to send spare parts or new products to replace. Our guarantee not include inappropriate operation or wrong specification selection.
Q3: How we select models and specifications?
A: You can email us the series code (for example: RC series helical gearbox) as well as requirement details, such as motor power,output speed or ratio, service factor or your application…as much data as possible. If you can supply some pictures or drawings,it is nice.
Q4: If we don’t find what we want on your website, what should we do?
A: We offer 3 options:
1, You can email us the pictures, drawings or descriptions details. We will try to design your products on the basis of our
standard models.
2, Our R&D department is professional for OEM/ODM products by drawing/samples, you can send us samples, we do customized design for your bulk purchasing.
3, We can develop new products if they have good market. We have already developed many items for special using successful, such as special gearbox for agitator, cement conveyor, shoes machines and so on.
Q5: Can we buy 1 pc of each item for quality testing?
A: Yes, we are glad to accept trial order for quality testing.
Q6: How about your product delivery time?
A: Normally for 20’container, it takes 25-30 workdays for RV series worm gearbox, 35-40 workdays for helical gearmotors.
| Application: | Motor, Motorcycle, Machinery, Agricultural Machinery |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | M1-M6 |
| Layout: | Coaxial |
| Gear Shape: | Cylindrical Gear |
| Step: | Double-Step |
| Customization: |
Available
| Customized Request |
|---|
Can a Worm Gearbox be Used for High-Speed Applications?
Worm gearboxes are generally not recommended for high-speed applications due to their inherent design characteristics. Here’s why:
- Efficiency: Worm gearboxes tend to have lower efficiency compared to other gearbox types, which means they can generate more heat and experience more energy loss at high speeds.
- Heat Generation: The sliding contact between the worm and worm wheel in a worm gearbox can lead to significant friction and heat generation, especially at high speeds. This heat can cause thermal expansion, affecting the gearbox’s performance and longevity.
- Wear and Noise: High speeds can exacerbate wear and noise issues in worm gearboxes. Increased friction and wear can lead to faster degradation of components, resulting in reduced lifespan and increased maintenance needs.
- Backlash: Worm gearboxes may have higher backlash compared to other gearbox types, which can impact precision and accuracy in high-speed applications.
While worm gearboxes are more commonly used in applications requiring high torque and moderate speeds, they may not be the best choice for high-speed scenarios. If high-speed operation is a requirement, other gearbox types such as helical, spur, or planetary gearboxes are often better suited due to their higher efficiency, lower heat generation, and reduced wear at elevated speeds.
Worm Gearboxes in Conveyor Systems: Benefits and Considerations
Worm gearboxes play a crucial role in conveyor systems, offering several benefits and considerations for their effective integration:
- Space Efficiency: Worm gearboxes have a compact design, making them suitable for applications with limited space, such as conveyor systems.
- High Reduction Ratios: Worm gearboxes can achieve high reduction ratios in a single stage, allowing for slower conveyor speeds without sacrificing torque.
- Self-Locking: Worm gearboxes have inherent self-locking properties, preventing the conveyor from moving when the motor is not actively driving it.
- Directional Control: Worm gearboxes facilitate directional control, enabling the conveyor to move forward or reverse as needed.
- Low Noise: Worm gearboxes often produce lower noise levels compared to other gearbox types, contributing to quieter conveyor operation.
However, there are also considerations to keep in mind when using worm gearboxes in conveyor systems:
- Efficiency: Worm gearboxes may have lower mechanical efficiency compared to some other gearbox types, leading to energy losses.
- Heat Generation: Worm gearboxes can generate more heat due to sliding contact between the worm and gear, necessitating proper cooling mechanisms.
- Lubrication: Proper lubrication is critical to prevent wear and ensure efficient operation. Regular maintenance is required to monitor lubrication levels.
- Load and Speed: Worm gearboxes are well-suited for applications with high torque and low to moderate speed requirements. They may not be optimal for high-speed conveyors.
Before integrating a worm gearbox into a conveyor system, it’s important to carefully consider the specific requirements of the application, including load, speed, space constraints, and efficiency needs. Consulting with gearbox experts and manufacturers can help ensure the right choice for the conveyor’s performance and longevity.
How to Select the Right Worm Gearbox for Your Application
Selecting the right worm gearbox for your application involves careful consideration of various factors:
- Load Requirements: Determine the torque and load requirements of your application to ensure the selected gearbox can handle the load without compromising performance.
- Speed Reduction: Calculate the required gear reduction ratio to achieve the desired output speed. Worm gearboxes are known for high reduction ratios.
- Efficiency: Consider the gearbox’s efficiency, as worm gearboxes typically have lower efficiency due to the sliding action. Evaluate whether the efficiency meets your application’s needs.
- Space Constraints: Assess the available space for the gearbox. Worm gearboxes have a compact design, making them suitable for applications with limited space.
- Mounting Options: Determine the mounting orientation and configuration that best suits your application.
- Operating Environment: Consider factors such as temperature, humidity, and exposure to contaminants. Choose a gearbox with appropriate seals and materials to withstand the environment.
- Backlash: Evaluate the acceptable level of backlash in your application. Worm gearboxes may exhibit more backlash compared to other gear types.
- Self-Locking: If self-locking capability is required, confirm that the selected gearbox can prevent reverse motion without the need for external braking mechanisms.
- Maintenance: Consider the maintenance requirements of the gearbox. Some worm gearboxes require periodic lubrication and maintenance to ensure proper functioning.
- Cost: Balance the features and performance of the gearbox with the overall cost to ensure it aligns with your budget.
Consult with gearbox manufacturers or experts to get recommendations tailored to your specific application. Testing and simulations can also help validate the suitability of a particular gearbox for your needs.
editor by CX 2023-09-13
China Hot selling K Helical Bevel Gear Motor Shaft Mounted Gear Speed Reducer Marine Transmission Gearbox Harmonic Drive Reducer Restaurant Hotels near me shop
Guarantee: 3 years
Relevant Industries: Resorts, Garment Stores, Developing Content Stores, Production Plant, Machinery Mend Stores, Foods & Beverage Manufacturing unit, Farms, Restaurant, Residence Use, Retail, Food Store, Printing Outlets, Energy & Mining, Food & Beverage Outlets, Marketing Firm, Building operates
Gearing Arrangement: Helical
Output Torque: 10~62800N.m
Input Speed: 1450/960rpm
Output Pace: fourteen-280rpm
Ratio: 5.36~197.37
Mount Placement: Foot Mounted
Bearing: LYC, NMRVseries25 NMRVseries75 High Quality Electric Drill 2 Pace Worm Reducer Gearbox Industrial HRB,ZWZ,NSK
Certification: ISO9001-2008
Packaging Details: Picket boxes , Cantons packed in 1 pallet
Port: HangZhou Port, ZheJiang Port
K Series Helical Bevel Reduction GearboxAttributes of goods1. Extremely Regular Modular Designed: The products are easily linked with and pushed by distinct varieties of motors and numerous input electrical power. The very same type geared motor can be adapted to optioned powers of motors. It is therefore straightforward to understand diverse solution for diverse requirements.2. Ratio: Highlighted numerous intently divided ratios and extensive range of them. Really big final ratios can be acquired by way of mixed unites to attain incredibly low output speeds.3. Mounting Arrangement: No stringent limitation to the mounting arrangement.4. Large Energy, Compact Dimension: Housings are produced of high toughness forged iron. Gears and shaft gears are completed with fuel carburizing procedure and exact grounding to sequentially get high loading capacity of for each certain volume.5. Extended Support Lifestyle: Beneath the situation of correctly picking sort dimensions and the typical upkeep and use, main components (assume individuals very easily-disabled elements) can final as extended as up to far more than twenty five,000 several hours. Simply-disabled elements include lubricating oil, oil seals, and bearings.6. Reduced Sounds: All essential elements are concluded by precisely machining, correct assembly, and last but not least examined, and therefore, relatively lower sounds is attained.7. High Performance: The effectiveness of gear unit can get to 95%, The effectiveness of worm equipment unit can reach 89%.8. Big radial loading capability.9. Axial load capability of up to 5% of radial load. Design:K Sequence – Foot-mounted, sound shaft outputKAB Series – Foot-mounted, Low Value Gearbox Velocity Reducer Industrial Automatic Automobile Gearbox hollow shaft outputKA Sequence – Keyed hollow shaft outputKF Series – B5 Flange-mounted, sound shaft outputKAF Collection – B5 Flange-mounted, hollow shaft outputKAZ Collection – B14 Flange-mounted, hollow shaft outputKAT Collection – Hollow shaft output, torque armKH, KHB, KHF, KHZ Series – Hollow shaft output, shrink diskKV, KVB, NMRV Worm Gearbox With Motor Reductor Motor Gear Reductor KVF, KVZ Sequence – Hollow shaft output, splined hollow shaftK(KA, KF, KAF, KAB, KAZ)S Collection – Reliable shaft inputHousingCast IronInput power0.12-200kwOutput torque10-61900N.mOutput speed0.08-261rpmBearingC&U Bearing,NSK,SKF or on requestRatio5.36~178.37Installation FormFoot, Flange, Shaft MountedSealSKF,CTY,CFW or on requestGearsHelical-bevel GearsInput ConfigurationsEquipped with Electric MotorsSolid Shaft InputIEC-normalized Motor FlangeApplicable MotorsSingle Period AC Motor, Factory Cost Drive Shaft Center Bearing Assistance for CZPT Car 37230-12050 A few Period AC MotorBrake MotorsInverter MotorsMulti-pace MotorsExplosion-evidence MotorRoller MotorOutput ConfigurationsSolid Shaft OutputHollow Shaft OutputnstallationFoot-mountedB5 Flange-mountedB14 Flange-mountedShaft-mountedLubricationOil-tub and Splash Lubrication Installation Approach For a lot more designs, remember to speak to us！ Recommend Merchandise Organization Info Solution packaging FAQ
What is a push shaft?
If you observe a clicking noise whilst driving, it is most very likely the driveshaft. An skilled car mechanic will be able to inform you if the noise is coming from the two sides or from one particular aspect. If it only transpires on a single side, you must check out it. If you discover sounds on the two sides, you must get in touch with a mechanic. In both scenario, a alternative driveshaft must be straightforward to discover.
The drive shaft is a mechanical component
A driveshaft is a mechanical system that transmits rotation and torque from the engine to the wheels of the car. This part is vital to the operation of any driveline, as the mechanical electricity from the motor is transmitted to the PTO (electricity take-off) shaft, which hydraulically transmits that power to linked equipment. Diverse push shafts contain various mixtures of joints to compensate for modifications in shaft duration and angle. Some types of travel shafts contain connecting shafts, interior consistent velocity joints, and external fixed joints. They also have anti-lock technique rings and torsional dampers to prevent overloading the axle or leading to the wheels to lock.
Though driveshafts are fairly mild, they require to take care of a good deal of torque. Torque utilized to the push shaft creates torsional and shear stresses. Because they have to stand up to torque, these shafts are created to be lightweight and have tiny inertia or bodyweight. For that reason, they normally have a joint, coupling or rod among the two elements. Elements can also be bent to accommodate changes in the length between them.
The travel shaft can be created from a assortment of supplies. The most typical substance for these components is metal, despite the fact that alloy steels are often utilised for higher-strength applications. Alloy metal, chromium or vanadium are other supplies that can be utilised. The kind of material used relies upon on the software and dimensions of the part. In numerous situations, metal driveshafts are the most sturdy and most affordable choice. Plastic shafts are utilised for light-weight responsibility apps and have different torque stages than metal shafts.
It transfers energy from the motor to the wheels
A car’s powertrain is composed of an electrical motor, transmission, and differential. Every section performs a particular work. In a rear-wheel drive motor vehicle, the electricity created by the engine is transmitted to the rear tires. This arrangement improves braking and dealing with. The differential controls how a lot electricity each wheel gets. The torque of the engine is transferred to the wheels according to its velocity.
The transmission transfers electricity from the motor to the wheels. It is also known as “transgender”. Its work is to guarantee electricity is shipped to the wheels. Electrical vehicles can’t generate by themselves and need a gearbox to drive ahead. It also controls how significantly electricity reaches the wheels at any offered instant. The transmission is the last portion of the electricity transmission chain. In spite of its a lot of names, the transmission is the most complicated ingredient of a car’s powertrain.
The driveshaft is a prolonged metal tube that transmits mechanical electricity from the transmission to the wheels. Cardan joints hook up to the travel shaft and provide adaptable pivot details. The differential assembly is mounted on the travel shaft, enabling the wheels to change at various speeds. The differential permits the wheels to flip at various speeds and is really crucial when cornering. Axles are also essential to the efficiency of the automobile.
It has a rubber boot that shields it from dust and humidity
To keep this boot in good issue, you ought to cleanse it with chilly water and a rag. Never location it in the dryer or in direct sunlight. Heat can deteriorate the rubber and result in it to shrink or crack. To lengthen the daily life of your rubber boots, use rubber conditioner to them regularly. Indigenous peoples in the Amazon location accumulate latex sap from the bark of rubber trees. Then they place their toes on the fireplace to solidify the sap.
it has a U-shaped connector
The travel shaft has a U-joint that transfers rotational strength from the motor to the axle. Defective gimbal joints can trigger vibrations when the automobile is in motion. This vibration is frequently mistaken for a wheel harmony problem. Wheel stability troubles can cause the vehicle to vibrate whilst driving, whilst a U-joint failure can trigger the car to vibrate when decelerating and accelerating, and quit when the vehicle is stopped.
The generate shaft is related to the transmission and differential making use of a U-joint. It allows for small changes in place in between the two parts. This prevents the differential and transmission from remaining perfectly aligned. The U-joint also permits the push shaft to be linked unconstrained, making it possible for the automobile to shift. Its major purpose is to transmit electric power. Of all sorts of elastic couplings, U-joints are the oldest.
Your vehicle’s U-joints must be inspected at least 2 times a calendar year, and the joints need to be greased. When examining the U-joint, you ought to hear a uninteresting sound when changing gears. A clicking sound suggests insufficient grease in the bearing. If you listen to or really feel vibrations when shifting gears, you may want to support the bearings to lengthen their existence.
it has a slide-in tube
The telescopic design is a contemporary different to classic driveshaft types. This innovative design and style is primarily based on an unconventional design philosophy that brings together developments in substance science and production procedures. For that reason, they are far more effective and lighter than standard types. Slide-in tubes are a easy and productive layout resolution for any automobile application. Below are some of its benefits. Read on to discover why this type of shaft is ideal for numerous applications.
The telescopic push shaft is an critical portion of the standard automobile transmission program. These driveshafts permit linear movement of the two parts, transmitting torque and rotation all through the vehicle’s driveline. They also absorb strength if the vehicle collides. Typically referred to as foldable driveshafts, their popularity is directly dependent on the evolution of the automotive business.
It utilizes a bearing press to change worn or broken U-joints
A bearing push is a system that makes use of a rotary push system to set up or eliminate worn or damaged U-joints from a travel shaft. With this instrument, you can exchange worn or ruined U-joints in your vehicle with relative simplicity. The very first stage entails positioning the generate shaft in the vise. Then, use the eleven/16″ socket to push the other cup in much sufficient to set up the clips. If the cups never match, you can use a bearing push to eliminate them and repeat the method. Right after taking away the U-joint, use a grease nipple Make certain the new grease nipple is set up appropriately.
Worn or broken U-joints are a major resource of driveshaft failure. If 1 of them have been ruined or destroyed, the entire driveshaft could dislocate and the automobile would get rid of electrical power. Unless you have a expert mechanic doing the repairs, you will have to change the whole driveshaft. Thankfully, there are a lot of approaches to do this yourself.
If any of these warning indications appear on your motor vehicle, you must contemplate replacing the broken or worn U-joint. Widespread indicators of destroyed U-joints include rattling or periodic squeaking when moving, rattling when shifting, wobbling when turning, or rusted oil seals. If you recognize any of these symptoms, take your vehicle to a qualified mechanic for a complete inspection. Neglecting to change a worn or damaged u-joint on the driveshaft can end result in costly and hazardous repairs and can trigger important damage to your vehicle.
China best 14631507 14645005 EC700C Excavator Slewing Drive Gearbox Unit EC700B Swing Motor near me factory
Condition: New
Relevant Industries: Hotels, Garment Shops, Creating Material Stores, Equipment Fix Stores, Manufacturing Plant, Foodstuff & Beverage Manufacturing unit, Farms, Cafe, Residence Use, Retail, Meals Store, Printing Outlets, Construction works , Strength & Mining, Meals & Beverage Outlets, Advertising Business, Other individuals
Showroom Spot: None
Video clip outgoing-inspection: Supplied
Equipment Check Report: Provided
Marketing and advertising Sort: Scorching Item 2019
Warranty: 1 Yr
Solution: 14631507 14645005 EC700C Slewing Generate Gearbox Unit EC700B Swing Motor
Other product: EC25 EC35 EC55 EC140 EC160 EC210 EC240 EC290 EC360 EC460 EC480 etc.
Good quality: Extremely very good
Swing motor Problem: New / rebuilt / utilized / aftermarket alternative / real unique
Identify: excavator oil swing motor assy gearbox gadget
Excavator swing motor elements: motor,gearbox,shaft,equipment,piston,cylinder block,valve plate
Swing Motor manufacturer: kyb,kawasaki,rexroth,nachi,t-oshiba and many others.
Swing motor variety: msg 27p m2x120 m2x150 m5x130 m5x180 sg08 mfc160 PCL-a hundred and twenty PCR-1B PCR-2B
Excavator hydraulic elements: swing motor gearbox,last generate vacation motor,hydraulic pump
Soon after-sales Provider Offered: Totally free spare elements
Packaging Details: picket scenario with filler inside and outdoors PE movie to protectPackage: 40x40x40cm
Port: HangZhou,ZheJiang ,HangZhou,HangZhou,HangZhou,HangZhou and many others.
14631507 14645005 EC700C Excavator Slewing Generate Gearbox Device EC700B Swing Motor
14631507 14645005 EC700C Excavator Slewing Push Gearbox Device EC700B Swing Motor hydraulic parts assy assembly motor gearbox
14631507 14645005 EC700C Excavator Slewing Push Gearbox Unit EC700B Swing Motor
excavator hydraulic swing / slewing machinery motor assy / assembly gearbox shaft equipment, Handbook Steel Chain Hoist 1 ton Chain Pulley Block manual chain hoist real / authentic oem substitution
EXCAVATOR Product Quantity
PC56-7 PC60-8 PC70-8 PC110-7 PC130-7 PC160-7 PC200-8 PC200LC-8 PC210-8 PC210LC-8 PC220-8 PC240LC-8 HB205-1 HB215LC-1 PC270-7 PC300-7 PC360-7 PC400-8 PC450-8 Other individuals
three hundred 301 302 303 304 305 306 307 311 312 313 314 315 318 320 323 324 326 329 328 336 340 345 349 Other folks
SK55SR-5 SK55SRX SK60-C SK60-8 SK70SR-2 SK75-8 SK130 SK130-8 SK135SR-2 SK140LC SK140LC-8 SK200-8 SK210LC-8 SK250-8 SK260LC-8 SK270D SK330-8 SK350LC-8 SK380D SK460-8 SK480 SK480-8 SK495D SK850LC Other folks
ZAXIS60 ZAXIS70 ZAXIS120 ZAXIS130 ZAXIS200 ZAXIS200-3 ZAXIS210 ZAXIS210LC ZAXIS210LC-3 ZAXIS210H ZAXIS210H-3 ZAXIS240-3 ZAXIS250 ZAXIS250LC ZAXIS250LC-3 ZAXIS250H ZAXIS250H-3 ZAXIS260LCH-3 ZAXIS270 ZAXIS270-3 ZAXIS330 ZAXIS330-3 ZAXIS360 Other people
DH55 DX60 DH60-7 DX75 DX80 DX120 DX150LC DH150LC-7 DH215-9 DH215-9E DH220LC-9E DH225LC-9 DX260LC DX300LC DH300LC-7 DX345LC DH370LC-9 DX380LC DX420LC DH420LC-7 DX500LC DH500LC-7 DX700LC Other folks
R55-7 R60 R80-7 R110-7 R150 R215 R225 R265 R275 R305 R335 R375 R385 Others
EC55B EC60 EC80 EC140B EC200 EC210B EC220 EC240B EC250 EC300 EC350 EC360B EC380 EC460B EC480 EC700B Other individuals
8052 8060 8061 JS85 JS130 JS145 JS200 JS210 JS220 JS230 JS240 JS240LC JZ255 JS290 JS360 JS370 Other people
……
Our principal Aggressive components:one.Final push(real,south korea,japan brand name)(price is quite quite good,as we are skilled)legitimate rebuiltKYB Magazine sequence(Magazine-eighteen,Mag-26,Mag-33,Mag-85,Mag-one hundred seventy)Nabotsco GM sequence(GM04,GM06,GM07,GM09,GM10,GM18,GM21,GM35,GM38)Nachi PHV series2.Travel gearbox,primarily are aftermarket,with quite great cost.3.Hydraulic pumps(legitimate,south korea,japan manufacturer)authentic rebuilt.Kawasaki K3V K5V seriesNachi PVD sequence (PVD-1B,PVD-2B,PVD-3B)4.Swing gadget,swing motor,swing gearbox,swing bearingOther Aftermarket hydraulic cylinder,bucket,arm and boom,cabin,undercarraige components,rubber tracksSo,if you need to have any element,welcome for inquire,we can aid you to discover it listed here.
Solution characteristic
1. Common item design2. Substantial quality materials selection3. Advanced imported manufacture & tests equipment4. Innovative manifacturing procedure and generation technology5. in the line with worldwide standards6. By extended time tests, 2571751 VOE2571751 Belt Tensioner Pulley For EC480 Excavator proved to be very good condition
Packaging & ShippingPerfect and saftey deal
The typical bundle is wooden box. If export to european international locations,the wooden box will be fumigated.If container is as well tigher,we will use pe movie for packing or pack it according to customers specific ask for.
We will deliver with wood circumstance by convey, air, sea or land as your request.If much less than 45KG, I recommend express like DHL, FEDEX, TNT…If forty five-300KG, I advise air to airport.If more than 300KG, I advise sea to seaport and land to town.
Our Services1. Good top quality & inexpensive price2. Suitable transport & fast delivery3. Maintenance direction & patiently solved
Organization InformationOur company is positioned in the famous design equipment metropolis – HangZhou, ZheJiang province, China, and below is the base of Shantui bulldozer and PC… excavator factories. We are specialised in the export of design equipment and components.We can provide real elements or OEM parts appropriate with several manufacturers. The merchandise contains ultimate travel, hydraulic pump, swing mtor, undercarriage elements, engine components, excavator cab, boom arm bucket etc. We will source you all areas with excellent good quality and competitive cost.Welcome all clientele at residence and overseas to speak to us and create mutually beneficial business relationships.
This is our warehouse.
FAQQ: How to assure the exact same?A: Before sending, I will get photographs. Soon after affirmation, I send.
Q: When to ship?A: As soon as getting payment then set up.
Q: Import customs price?A: It depends on import place. I can make reduced valve so that you can pay reduced customs payment even no require to pay.
Q: How long for transport?A: For convey/ air, it will take about 5 times. For land/ sea, it will take about 1 thirty day period. It depeds on your address.
Q: Product utilization?A If any issue about utilization, I will solve at 1st time.
Q: Set your emblem and manufacturer on component?A: Yes, you should send me your want emblem then I make it into stickers on part.
Trade Shows1) This is our present in ZheJiang .
two) This is our show in Moscow.
three) This is our display in Bangalore, India.
Customer Suggestions
one. We make success by count on our alibaba status and consumer pleasure, therefore, your comments is extremely crucial to us. Please leave excellent comments to us if you are satisfied with our goods and services.2. We care about our valued buyers and will usually attempt to assist you. You should contact us just before leaving any poor feedback. We will attempt our greatest to operate with you to solve any problem.
Related ProductsEngine areas: total motor, total gasket kit, guide gearbox areas zf synchronizer ring metal ring 389 262 0637 for Mercedes Benz piston, liner, starter, crankshaft, block, head, rod, injector, fuel pump, turbo, alternator, fan, controller…
Undercarriage parts: rubber track, track chain with monitor shoe, sprocket, loafer with spring, sprocket, provider roller, track roller…
Structure component: boom, arm, bucket, enamel and pin, quick coupler, cylinder, link…
Cab areas: taxi physique, glass, monitor, controller, seat, radio, doorway, joystick, pedal, air conditioning, High Quality Made In China Gearbox Transmission Synchronizer Ring 1ST2ND FOR FIAT DUCATO PEUGEOT BOXER 357100440502 wiper….
Other components: oil cooler, radiator…
TradeManager: cn157161479http://sdhaide.en.alibaba.com/
Welcome to our organization website and cooperate in the near potential!
Guide to Push Shafts and U-Joints
If you might be worried about the overall performance of your car’s driveshaft, you are not by yourself. Numerous automobile house owners are unaware of the warning indications of a unsuccessful driveshaft, but knowing what to look for can aid you avoid pricey repairs. Below is a short information on generate shafts, U-joints and upkeep intervals. Listed underneath are key details to contemplate prior to changing a motor vehicle driveshaft.
Signs of Driveshaft Failure
Determining a defective driveshaft is easy if you have ever listened to a strange sounds from beneath your automobile. These seems are caused by worn U-joints and bearings supporting the drive shaft. When they are unsuccessful, the travel shafts quit rotating effectively, generating a clanking or squeaking sound. When this takes place, you could listen to sound from the aspect of the steering wheel or ground.
In addition to sound, a faulty driveshaft can trigger your car to swerve in tight corners. It can also guide to suspended bindings that restrict overall manage. As a result, you must have these signs and symptoms checked by a mechanic as soon as you notice them. If you notice any of the symptoms over, your subsequent step should be to tow your motor vehicle to a mechanic. To stay away from extra trouble, make certain you’ve taken safety measures by checking your car’s oil stage.
In addition to these signs and symptoms, you need to also seem for any sound from the travel shaft. The very first point to seem for is the squeak. This was induced by severe harm to the U-joint hooked up to the travel shaft. In addition to noise, you should also look for rust on the bearing cap seals. In excessive situations, your vehicle can even shudder when accelerating.
Vibration whilst driving can be an early warning indicator of a driveshaft failure. Vibration can be thanks to worn bushings, stuck sliding yokes, or even springs or bent yokes. Abnormal torque can be brought on by a worn center bearing or a destroyed U-joint. The car might make abnormal noises in the chassis method.
If you recognize these signs, it’s time to take your car to a mechanic. You should check routinely, specially large vehicles. If you might be not certain what is triggering the sounds, examine your car’s transmission, engine, and rear differential. If you suspect that a driveshaft needs to be replaced, a certified mechanic can substitute the driveshaft in your auto.
Generate shaft sort
Driveshafts are used in many various varieties of automobiles. These contain 4-wheel drive, front-engine rear-wheel drive, motorcycles and boats. Each type of drive shaft has its possess goal. Underneath is an overview of the three most typical types of drive shafts:
The driveshaft is a round, elongated shaft that transmits torque from the engine to the wheels. Drive shafts typically include several joints to compensate for adjustments in duration or angle. Some push shafts also include connecting shafts and interior consistent velocity joints. Some also incorporate torsional dampers, spline joints, and even prismatic joints. The most critical thing about the driveshaft is that it performs a important function in transmitting torque from the engine to the wheels.
The travel shaft needs to be the two mild and sturdy to go torque. While steel is the most typically utilized content for automotive driveshafts, other supplies this sort of as aluminum, composites, and carbon fiber are also frequently utilized. It all is dependent on the objective and dimensions of the automobile. Precision Production is a excellent source for OEM items and OEM driveshafts. So when you might be looking for a new driveshaft, keep these factors in brain when purchasing.
Cardan joints are one more frequent travel shaft. A universal joint, also acknowledged as a U-joint, is a adaptable coupling that makes it possible for a single shaft to generate the other at an angle. This sort of travel shaft enables energy to be transmitted whilst the angle of the other shaft is consistently changing. Whilst a gimbal is a excellent option, it really is not a best remedy for all applications.
CZPT, Inc. has condition-of-the-artwork equipment to support all types of travel shafts, from little vehicles to race cars. They provide a range of demands, like racing, sector and agriculture. Whether or not you need a new travel shaft or a basic adjustment, the employees at CZPT can meet all your wants. You will be again on the highway shortly!
U-joint
If your automobile yoke or u-joint demonstrates indications of use, it really is time to exchange them. The simplest way to exchange them is to comply with the measures below. Use a big flathead screwdriver to take a look at. If you feel any motion, the U-joint is defective. Also, inspect the bearing caps for harm or rust. If you can not discover the u-joint wrench, try checking with a flashlight.
When inspecting U-joints, make certain they are properly lubricated and lubricated. If the joint is dry or improperly lubricated, it can swiftly fail and trigger your auto to squeak even though driving. Another sign that a joint is about to fall short is a sudden, excessive whine. Check out your u-joints each and every calendar year or so to make sure they are in correct functioning buy.
No matter whether your u-joint is sealed or lubricated will rely on the make and product of your automobile. When your car is off-road, you require to install lubricable U-joints for sturdiness and longevity. A new driveshaft or derailleur will price much more than a U-joint. Also, if you do not have a great understanding of how to replace them, you could want to do some transmission work on your car.
When changing the U-joint on the travel shaft, be certain to decide on an OEM alternative every time possible. Even though you can effortlessly mend or substitute the unique head, if the u-joint is not lubricated, you may require to replace it. A ruined gimbal joint can trigger problems with your car’s transmission or other essential parts. Replacing your car’s U-joint early can make certain its prolonged-term efficiency.
Yet another choice is to use two CV joints on the travel shaft. Using a number of CV joints on the generate shaft helps you in conditions where alignment is tough or working angles do not match. This sort of driveshaft joint is more costly and complex than a U-joint. The disadvantages of using numerous CV joints are further duration, bodyweight, and reduced working angle. There are many reasons to use a U-joint on a drive shaft.
maintenance interval
Examining U-joints and slip joints is a essential element of routine maintenance. Most autos are geared up with lube fittings on the driveshaft slip joint, which ought to be checked and lubricated at every single oil modify. CZPT technicians are effectively-versed in axles and can simply determine a bad U-joint based mostly on the seem of acceleration or shifting. If not fixed effectively, the push shaft can fall off, requiring high-priced repairs.
Oil filters and oil alterations are other elements of a vehicle’s mechanical system. To prevent rust, the oil in these parts should be replaced. The very same goes for transmission. Your vehicle’s driveshaft must be inspected at the very least each and every sixty,000 miles. The vehicle’s transmission and clutch must also be checked for use. Other components that need to be checked consist of PCV valves, oil strains and connections, spark plugs, tire bearings, steering gearboxes and brakes.
If your car has a handbook transmission, it is greatest to have it serviced by CZPT’s East Lexington experts. These companies need to be performed every single two to four several years or each 24,000 miles. For ideal outcomes, refer to the owner’s guide for advised servicing intervals. CZPT experts are seasoned in axles and differentials. Regular routine maintenance of your drivetrain will keep it in excellent functioning order.