Product Description
NMRV REDUCTION WORM GEARBOX
The NMRV 110 angular worm gear motor is designed to increase torque while reducing rotational speed. The drive is equipped with a single-stage gearbox and an electric motor with a power of 0.55 – 7.5 kW. The torque on the output shaft is 163 – 767 N * m. Gear Ratio Range: 7.5 – 100.
The NMRV 110 unit has the same mounting dimensions as the SITI MU105 and Varvel SRT 110 gearmotors, so it can be used to replace them.
Materials parts:
Body – iron, flanges – iron, worm – steel CHINAMFG worm wheel – bronze.
Type of lubricant: synthetic ISO VG 220.
Weight: 35 kg.
Type designation scheme
NMRV – 110 – 40 – 35 – 1.5 – B6
- NMRV – worm gear motor
- 110 – size (center distance, mm)
- 40 – gear ratio
- 35 – output shaft rotation speed, rpm
- 1,5 – electric motor power, kW
- B6 – mounting position
NMRV 110 gearbox performance
i | n 1 = 2800 rpm | n 1 = 1400 rpm | n 1 = 900, rpm | |||||||||
n 2 , rpm |
T 2M , N * m |
P kw |
RD % |
n 2 , rpm |
T 2M , N * m |
P kw |
RD % |
n 2 , rpm |
T 2M , N * m |
P kw |
RD % |
|
7.5 | 373 | 391 | 16.60 | 92 | 187 | 532 | 11.60 | 90 | 120 | 637 | 9.10 | 88 |
10 | 280 | 424 | 13.50 | 92 | 140 | 571 | 9.30 | 90 | 90 | 672 | 7.20 | 87 |
15 | 187 | 423 | 9.30 | 89 | 93 | 565 | 6.40 | 86 | 60 | 669 | 5.00 | 84 |
20 | 140 | 498 | 8.30 | 88 | 70 | 649 | 5.60 | 85 | 45 | 748 | 4.30 | 82 |
25 | 112 | 453 | 5.90 | 90 | 56 | 580 | 4.00 | 85 | 36 | 674 | 3.10 | 82 |
30 | 93 | 349 | 4.00 | 85 | 47 | 553 | 3.40 | 80 | 30 | 663 | 2.70 | 77 |
40 | 70 | 554 | 4.90 | 83 | 35 | 681 | 3.20 | 78 | 23 | 809 | 2.60 | 75 |
50 | 56 | 531 | 3.80 | 82 | 28 | 657 | 2.50 | 77 | 18 | 746 | 1.90 | 74 |
60 | 47 | 428 | 2.70 | 78 | 23 | 546 | 1.80 | 73 | 15 | 615 | 1.40 | 69 |
80 | 35 | 445 | 2.20 | 74 | 18 | 549 | 1.50 | 68 | 11 | 640 | 1.10 | 67 |
100 | 28 | 394 | 1.70 | 68 | 14 | 473 | 1.10 | 63 | 9 | 557 | 0.89 | 59 |
- n1 – rotational speed el. engine;
- n2 – revolutions on the output shaft;
- T 2M – torque on the output shaft;
- P is the maximum allowable engine power;
- RD – efficiency
GEARBOX FEATURE
1.Good quality,long life time,low noise. |
2.Compact,convenient. |
3.High efficiency,big torque. |
Overall and mounting dimensions NMRV 110
NMRV110 gear motor has a wide range of gear ratios.
Gear ratios: 7.5, 10, 15, 20, 25, 30, 40, 50, 60, 80, 100 .
Output flange to NMRV 110 gearbox
Geared NMRV110 can be supplied with unilateral or bilateral output shaft.
The gearbox comes standard with a hollow output shaft
A torque arm is an additional option to the gearbox.
Model | NMRV SERIES |
Single Stage | RV25-RV150 |
Ratio | 7.5-100 |
Input Power | 0.06KW-15KW |
Output Speed | 14-280rpm |
Output Torque | 5-1800Nm |
Core parts | worm wheel,worm shaft |
Core parts material | worm shaft:20 Cr Mn Ti,worm wheel:Nodular cast iron interal,9-4 copper external |
Lubrication | RV30-90:synthetic oil, RV110-150:GN460-W mineral oil |
Bearings | C&U |
Application: | Motor, Motorcycle, Machinery, Agricultural Machinery, Industry |
---|---|
Hardness: | Hardened |
Installation: | Any Angle |
Gear Shape: | Worm Gear |
Step: | Single-Step |
Type: | Worm and Wormwheel |
Samples: |
US$ 20/Piece
1 Piece(Min.Order) | |
---|
Customization: |
Available
| Customized Request |
---|
Maintenance Tips for Prolonging the Life of a Worm Gearbox
Proper maintenance is essential to ensure the longevity and reliable performance of a worm gearbox. Here are some maintenance tips to consider:
- Lubrication: Regularly check and replenish the lubricant in the gearbox. Use the recommended lubricant type and quantity specified by the manufacturer.
- Lubrication Schedule: Follow a lubrication schedule based on the operating conditions and manufacturer recommendations. Regular lubrication prevents friction, reduces wear, and dissipates heat.
- Temperature Monitoring: Keep an eye on the operating temperature of the gearbox. Excessive heat can degrade the lubricant and damage components.
- Cleanliness: Keep the gearbox and surrounding area clean from debris and contaminants. Regularly inspect and clean the gearbox exterior.
- Seal Inspection: Check for any leaks or damage to seals and gaskets. Replace them promptly to prevent lubricant leaks and contamination.
- Alignment: Ensure proper alignment between the worm and worm wheel. Misalignment can lead to increased wear and reduced efficiency.
- Torque Monitoring: Monitor the torque levels during operation. Excessive torque can cause overloading and premature wear.
- Regular Inspections: Periodically inspect all components for signs of wear, damage, or unusual noise. Replace worn or damaged parts promptly.
- Proper Usage: Operate the gearbox within its specified limits, including load, speed, and temperature. Avoid overloading or sudden changes in operating conditions.
- Expert Maintenance: If major maintenance or repairs are needed, consult the manufacturer’s guidelines or seek the assistance of qualified technicians.
By following these maintenance tips and adhering to the manufacturer’s recommendations, you can extend the lifespan of your worm gearbox and ensure its optimal performance over time.
How to Calculate the Efficiency of a Worm Gearbox
Calculating the efficiency of a worm gearbox involves determining the ratio of output power to input power. Efficiency is a measure of how well the gearbox converts input power into useful output power without losses. Here’s how to calculate it:
- Step 1: Measure Input Power: Measure the input power (Pin) using a power meter or other suitable measuring equipment.
- Step 2: Measure Output Power: Measure the output power (Pout) that the gearbox is delivering to the load.
- Step 3: Calculate Efficiency: Calculate the efficiency (η) using the formula: Efficiency (η) = (Output Power / Input Power) * 100%
For example, if the input power is 1000 watts and the output power is 850 watts, the efficiency would be (850 / 1000) * 100% = 85%.
It’s important to note that efficiencies can vary based on factors such as gear design, lubrication, wear, and load conditions. The calculated efficiency provides insight into how effectively the gearbox is converting power, but it’s always a good practice to refer to manufacturer specifications for gearbox efficiency ratings.
Preventing Backlash in a Worm Gearbox
Backlash in a worm gearbox can lead to reduced accuracy, positioning errors, and decreased overall efficiency. Here are steps to prevent or minimize backlash:
- High-Quality Components: Use high-quality worm gears and worm wheels with tight manufacturing tolerances. Precision components will help reduce backlash.
- Proper Meshing: Ensure the worm gear and worm wheel are properly aligned and meshed. Improper meshing can lead to increased backlash.
- Preload: Applying a small amount of preload to the worm gear can help reduce backlash. However, excessive preload can increase friction and wear.
- Anti-Backlash Mechanisms: Consider using anti-backlash mechanisms, such as spring-loaded systems or adjustable shims, to compensate for any inherent backlash.
- Lubrication: Proper lubrication can reduce friction and play a role in minimizing backlash. Use a lubricant that provides good film strength and reduces wear.
- Maintenance: Regularly inspect and maintain the gearbox to identify and address any changes in backlash over time.
It’s important to strike a balance between reducing backlash and maintaining smooth operation. Consulting with gearbox experts and following manufacturer guidelines will help you optimize your worm gearbox’s performance while minimizing backlash.
editor by CX 2023-09-13