Author Archives: ep

China Hot selling Truck Parts Bevel Gear Mercedes-Benz Rear Axle 17/29 9443500139 Transmission CZPT Wheel Pinion axle bearing

Product Description

(1) The accessories are made of high-quality raw materials and meet the quality inspection requirements.
(2) Professional assembly line assembly, each product is inspected.
(3) Unified brand packaging, customers can customize the brand.
(4) Unified brand cartons, inner bags, and overall foam packaging, heavy goods are used in thickened wooden boxes.
(5) Axle parts are made of 20Crmo, 40Crmo, and 42Crmo materials to increase product life, have strong wear resistance, and reduce noise.
(6) After 12 hours of heat treatment, the differential assembly can reach a hardness of 60-62 degrees, with stronger wear resistance and meeting the quality inspection standards.
(7) Material 20CRMNTI
(8) Heat treatment: Carburizing by multi-purpose furnace, carburizing layer depth 1.3-1.8, DC55OHV=1.1-1.4, tooth surface hardness HRC58-62, core hardness HRC33-48.
(9)Production process: The bar material is forged into blanks, normalized, rough and fine turned, gear cutting, heat treated, grinded, paired and ground, and finally each pair is inspected, cleaned, and rust-proofed before packaging and storage as finished products.

Product Parameters

BENZ PRODUCT REFERENCE

3873509823 38735	Differential housing
3553535715	Side gear
81356080571 35535	Spider
8135611 355353571	Input shaft
6533539750 653353571	Differential repair kit
355353	Locking nut
3553535714 653353	Driving gear
355353 387355713	Rear axle differential assembly
3553530614	Planetary gear
355353571	Side gear
3553530620	Spider
39335	Differential repair kit
355353571	Bushing
494335	Planetary gear washer
35713	Spider
346353571	High side gear
346353571	Inter axle planetary gear
346353571	Input shaft
659353 0571	Internal ring gear
3553541909	Ring gear support
34635	screw nut
	wheel hub
357153	flange
346354571	Sun gear
3463543009	Ring gear support
3463541412	Ring gear
3553541809	Ring gear support
3463543712	Ring gear
346354571	Wheel planetary gear
3463530925	Nut
3463501533	Bell hub Carrier with gears Wheel bell hub H272mm

Company Profile

HangZhou SINORISE IMPORT AND EXPORT CO.,LTD. was established in 2011. In 2012, it officially started the after-salesmarket export business of truck parts. From its establishment to today, HangZhou SINORISE has been committedto providing users with the highest quality products, according to the use of vehicles.

Provide users with The mostreasonable solution. In 2014, HangZhou SINORISE established a development strategy with the SINOASCEND brand as its core business.

After 5 years of development, the SINOASCEND brand has been widely recognized byusers. In january 2019, it began to independently develop and produce truck accessories.

It mainly develops andproduces 4 categories of products: qearbox, chassis accessories, engine and cab, and supports customersample(provide sample)customization.

Factroy Show

Products Recommended

Certifications

Our Advantages

1. We are a straight line factory, making our own brand
2. The manufacturer sells directly, and the price is always lower than the market value.
3. We have the capability to provide complete vehicle spare parts
4. We have many years of export experience and can provide you with complete sea freight documents for customs clearance.
5. SINORISE provides a large number of heavy-duty parts and accessories.

FAQ

Q: Who are we?
We are a manufacturer of heavy duty truck auto parts. We have 2 factory, and we have own brand, our product price is competitive.
We are based in ZheJiang , China, start from 2571,sell to Southeast Asia(50.00%),Africa(50.00%). There are total about 11-50 people in our office.

Q: How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

Q: what can you buy from us?
Chassis series,Rubber series,Gearbox series,Engine series,cab

Q: why should you buy from us not from other suppliers?
Because We have been engaged in auto parts industry over 10 years.
We have own brand is SINOASCEND.
We use the high grade raw material for our product, in order to extend service life of the product.

Q: what services can we provide?
Accepted Delivery Terms:10-15days
Accepted Payment Currency: USD RMB
Accepted Payment Type: TT LC
Language Spoken: English Chinese

Q: Are you trading company or manufacturer ?
A: We are factory. We have 2 factory, and about 500 produce staffs.

Q: How long is your delivery time?
A: Generally it is 3-7days if the goods are in stock. or it is 20-30days if the goods are not in stock, it is according to
quantity.

Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

/* May 10, 2571 16:49:51 */!function(){function d(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

axle

Where can I find information on axle load limits for various types of vehicles?

When seeking information on axle load limits for different types of vehicles, there are several reliable sources where you can find the necessary information. Here’s a detailed explanation of where you can find information on axle load limits:

1. Vehicle Owner’s Manual:

The first and most accessible source of information on axle load limits is the vehicle owner’s manual. The owner’s manual provided by the vehicle manufacturer typically includes important details about the vehicle’s specifications, including axle load limits. Look for sections related to vehicle loading, weight distribution, or axle specifications to find the recommended load limits for each axle of your specific vehicle model.

2. Government Transportation Authorities:

Government transportation authorities, such as departments of transportation or road transport authorities, often provide guidelines and regulations regarding vehicle weight limits, including axle load limits. These authorities establish and enforce weight restrictions to ensure road safety and prevent damage to infrastructure. Visit the website of your local or national transportation authority to access relevant regulations or guidelines pertaining to axle load limits for various types of vehicles.

3. Commercial Vehicle Regulations:

If you are specifically interested in axle load limits for commercial vehicles, such as trucks or buses, consult the commercial vehicle regulations applicable in your region. These regulations are established to ensure safe and efficient operation of commercial vehicles on public roads. Regulatory bodies responsible for commercial vehicle operations often provide detailed information on axle load limits, weight distribution requirements, and other related specifications.

4. Vehicle Manufacturer or Dealer:

If you require axle load limit information for a specific vehicle model or variant, contacting the vehicle manufacturer or a local authorized dealer can be helpful. They can provide accurate and up-to-date information specific to your vehicle. Provide them with the vehicle identification number (VIN) or other relevant details to ensure they can assist you accurately.

5. Online Resources and Databases:

There are online resources and databases dedicated to providing information on vehicle specifications, including axle load limits. These resources may include vehicle data websites, forums, or government databases that compile and provide access to vehicle specifications and regulatory information. Conduct an internet search using relevant keywords to find reliable online sources that offer information on axle load limits for various types of vehicles.

When seeking information on axle load limits, it’s crucial to ensure that the information you obtain is accurate, up-to-date, and applicable to your specific vehicle and jurisdiction. Regulations and load limits can vary depending on the country, region, vehicle type, and other factors. Therefore, it is advisable to consult official sources or seek professional advice to ensure compliance with applicable regulations and ensure safe and legal operation of your vehicle.

axle

What are the symptoms of a failing CV joint, and how does it relate to the axle?

A CV (constant velocity) joint is an essential component of the axle assembly in many vehicles. When a CV joint starts to fail, it can exhibit several symptoms that indicate potential problems. Here’s a detailed explanation of the symptoms of a failing CV joint and its relationship to the axle:

Symptoms of a Failing CV Joint:

1. Clicking or popping sounds: One of the most common signs of a failing CV joint is a clicking or popping sound when making turns. This noise usually occurs during tight turns and may indicate worn-out or damaged CV joint bearings.

2. Grease leakage: A failing CV joint may leak grease, which can be seen as dark-colored grease splattered around the CV joint or on the inside of the wheel. Grease leakage is typically caused by a cracked or damaged CV joint boot, which allows the lubricating grease to escape and contaminants to enter.

3. Excessive vibration: A worn-out CV joint can cause vibrations, especially during acceleration. The vibrations may be felt in the steering wheel, floorboards, or even the entire vehicle. These vibrations can become more noticeable as the CV joint deteriorates further.

4. Difficulty in turning: As the CV joint wears out, it may become difficult to turn the vehicle, especially at low speeds or when making sharp turns. This symptom is often accompanied by a clicking or popping sound.

5. Uneven tire wear: A failing CV joint can lead to uneven tire wear. If the CV joint is damaged or worn, it can cause the axle to wobble or vibrate, resulting in uneven tire tread wear. This can be observed by visually inspecting the tires and noticing uneven patterns of wear.

Relationship to the Axle:

The CV joint is an integral part of the axle assembly. It connects the transmission to the wheels and allows smooth power delivery to the wheels while accommodating the up-and-down motion of the suspension. The axle shaft is responsible for transmitting torque from the transmission to the CV joints and ultimately to the wheels.

Axles contain one or more CV joints, depending on the vehicle’s drivetrain configuration. In front-wheel drive vehicles, each front axle typically has two CV joints, one inner and one outer. Rear-wheel drive and all-wheel drive vehicles may have CV joints on both the front and rear axles.

The CV joint consists of a joint housing, bearings, and internal ball bearings or rollers. It is protected by a rubber or thermoplastic CV joint boot, which seals in the grease and protects the joint from contaminants. When the CV joint fails, it can affect the axle’s ability to transmit power smoothly and result in the symptoms mentioned above.

Regular inspection and maintenance of the CV joint and axle assembly are crucial to identify and address any issues promptly. If any of the symptoms mentioned earlier are observed, it is recommended to have the vehicle inspected by a qualified mechanic to determine the exact cause and perform necessary repairs or replacements.

axle

What are the signs of a worn or failing axle, and how can I troubleshoot axle issues?

Identifying the signs of a worn or failing axle is important for maintaining the safety and functionality of your vehicle. Here are some common signs to look out for and troubleshooting steps you can take to diagnose potential axle issues:

Unusual Noises:

If you hear clunking, clicking, or grinding noises coming from the area around the wheels, it could indicate a problem with the axle. These noises may occur during acceleration, deceleration, or when turning. Troubleshoot by listening carefully to the location and timing of the noises to help pinpoint the affected axle.

Vibrations:

A worn or failing axle can cause vibrations that can be felt through the steering wheel, floorboard, or seat. These vibrations may occur at certain speeds or during specific driving conditions. If you experience unusual vibrations, it’s important to investigate the cause, as it could be related to axle problems.

Uneven Tire Wear:

Inspect your tires for uneven wear patterns. Excessive wear on the inner or outer edges of the tires can be an indication of axle issues. Misaligned or damaged axles can cause the tires to tilt, leading to uneven tire wear. Regularly check your tires for signs of wear and take note of any abnormalities.

Difficulty Steering:

A worn or damaged axle can affect steering performance. If you experience difficulty in steering, such as stiffness, looseness, or a feeling of the vehicle pulling to one side, it may be due to axle problems. Pay attention to any changes in steering responsiveness and address them promptly.

Visible Damage or Leaks:

Inspect the axles visually for any signs of damage or leaks. Look for cracks, bends, or visible fluid leaks around the axle boots or seals. Damaged or leaking axles can lead to lubrication loss and accelerated wear. If you notice any visible issues, it’s important to have them inspected and repaired by a qualified mechanic.

Professional Inspection:

If you suspect axle issues but are unsure about the exact cause, it’s advisable to seek a professional inspection. A qualified mechanic can perform a thorough examination of the axles, suspension components, and related systems. They have the expertise and tools to diagnose axle problems accurately and recommend the appropriate repairs.

It’s important to note that troubleshooting axle issues can sometimes be challenging, as symptoms may overlap with other mechanical problems. If you’re uncertain about diagnosing or repairing axle issues on your own, it’s recommended to consult a professional mechanic. They can provide a proper diagnosis, ensure the correct repairs are performed, and help maintain the safety and performance of your vehicle.

axle axle
editor by lmc 2024-11-06

China high quality Round Trailer Axles Agricultural Trailer Axle Torsion Axle Without Brake for Sale axle car

Product Description

item	Trailer axle
Place of Origin	China
Province	ZheJiang
Brand Name	HK
Model Number	Customized Services
Process	Mainly Hot forging, Some parts with Cold forging ,welding axle
Material	Q355B
Weight	2000lbs-8000lbs
Applicable Machining Process	CNC Machining/ Lathing/ Milling/ Turning/ Boring/ Drilling/ Tapping/ Broaching/Reaming etc.
Machining Tolerance	0.03mm-0.1mm
Applicable Finish Surface Treatment	Shot/sand blast, polishing, Surface passivation, Primer Painting , Powder coating, ED- Coating, Chromate Plating, zinc-plate, Dacromat coating, Finish Painting,
Testing equipment	Supersonic inspection machine, Supersonic flaw detecting machine , physics and chemical analysis.
MOQ of mass production	100-500pcs
Testing equipment	Optical Spectrum Analyzer,tensile testing machine,impact testing machine,fluorescent magnetic particle detector,hardness tester,ultrasonic flaw detector..etc.
Packing	Wooden cases or according to customers’ needs

Detailed Photos

Company Profile

Huike Machinery is a China manufacturer specializing in producing trailer parts.

Our main products include trailer axles, torsion axles, forged hubs,spindle, and other accessories.

We offer a complete range of trailer parts and support customization.

Our products are exported to markets such as the United States, Canada, and Australia.

Quality Control

The company regards quality as cooperate life,as here to high standard and and high quality.

We got ISO9001 system,IATF16949,also sets up the consummate testing system,perfects quality assurance system,implements the rigid quality management,our aim is to realize zero defect,ensure each product to satisfy user.

The main testing equipment includes:CMM,Optical Spectrum Analyzer,tensile testing machine,impact testing machine,fluorescent magnetic particle detector,hardness tester,ultrasonic flaw detector..etc.

Our Advantages

1. In the trailer markets for more than decades, and have professional technical and manufacturing team.

2. We can produce various kinds of axles including CZPT axles, and spring axles with different kinds of brakes.

3. Accept customized and OEM products. We can produce based on your requirement.

4. Perfect after-sales service and at least 1 year warranty for our products.

Certifications

FAQ

Q1. Are you trade company or factory?
A: We are factory.

Q1. Do you supply samples?
A: Yes,we supply samples.some sample are free of charge.

Q1. What are you lead time?
A: Our lead time is about 30 days.

Q1. Do you support customization?
A: Yes,we accept OEM.

Q1. Which port is near to your factory?
A: HangZhou port.

/* May 10, 2571 16:49:51 */!function(){function d(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

axle

Where can I buy axle seals for preventing fluid leaks in my vehicle’s axles?

When it comes to purchasing axle seals to prevent fluid leaks in your vehicle’s axles, there are several options available. Here are some places where you can buy axle seals:

1. Automotive Parts Stores:

Visit local automotive parts stores such as AutoZone, Advance Auto Parts, O’Reilly Auto Parts, or NAPA Auto Parts. These stores typically have a wide range of automotive seals, including axle seals, in stock. You can either visit the physical store or check their online catalogs to find the specific axle seal you need for your vehicle.

2. Dealerships:

If you prefer to purchase genuine OEM (Original Equipment Manufacturer) axle seals, consider visiting a dealership authorized by your vehicle’s manufacturer. Dealerships often carry original parts that are specifically designed for your vehicle make and model. Contact your local dealership’s parts department to inquire about the availability of axle seals for your vehicle.

3. Online Retailers:

Online retailers like Amazon, eBay, and RockAuto offer a wide range of automotive parts, including axle seals. These platforms provide the convenience of browsing and purchasing axle seals from the comfort of your home. Make sure to check the product details, specifications, and customer reviews before making a purchase.

4. Local Mechanics and Repair Shops:

Local mechanics and repair shops often have access to a variety of automotive seals, including axle seals. They can source and install the appropriate seals for your vehicle during maintenance or repair services. Reach out to trusted local mechanics or repair shops in your area and inquire about their availability and pricing for axle seals.

5. Manufacturer’s Online Stores:

Some vehicle manufacturers have their own online stores where you can purchase genuine OEM parts, including axle seals. Visit the official website of your vehicle’s manufacturer and look for their online parts store. You can search for the specific axle seal needed for your vehicle using your vehicle identification number (VIN) or the model details.

6. Salvage Yards:

If you are looking for cost-effective options or rare axle seals, salvage yards can be an option. Salvage yards specialize in selling used parts salvaged from vehicles. However, when purchasing from salvage yards, it’s important to carefully inspect the condition and compatibility of the axle seals to ensure they are suitable for your vehicle.

When purchasing axle seals, make sure to provide accurate information about your vehicle’s make, model, and year to ensure you get the correct seals that fit your vehicle’s axle specifications. Additionally, consider factors such as the quality of the seals, warranty options, and return policies when making your purchase decision.

Remember, if you are unsure about the specific axle seals required for your vehicle or need assistance with installation, it is recommended to consult with a qualified mechanic or technician who can guide you in selecting the right seals and ensure proper installation to prevent fluid leaks in your vehicle’s axles.

axle

What is the difference between front and rear axles in a typical vehicle?

In a typical vehicle, there are distinct differences between the front and rear axles due to their respective roles and functions. Here are the key differences:

Position:

The main difference between the front and rear axles is their position in the vehicle. The front axle is located in the front of the vehicle, while the rear axle is positioned at the rear. This positioning is determined by the vehicle’s drivetrain configuration.

Steering:

The front axle is responsible for steering the vehicle. It is connected to the steering system, allowing the driver to control the direction of the vehicle. The front axle typically includes components such as steering knuckles, tie rods, and steering linkages.

Driving:

The rear axle is primarily responsible for driving the vehicle’s wheels. It receives power from the engine through the transmission or differential and transfers that power to the rear wheels. The rear axle may include components such as axle shafts, differential gears, and wheel hubs.

Suspension:

Both the front and rear axles play a role in the vehicle’s suspension system, but their configurations and functions differ. The front axle typically incorporates suspension components such as control arms, struts, or independent suspension systems to provide better handling, stability, and ride comfort. The rear axle may have a solid axle setup or independent suspension depending on the vehicle’s design.

Load Distribution:

The load distribution on the front and rear axles varies. In a typical vehicle, the front axle carries the weight of the engine, transmission, and a portion of the vehicle’s weight due to the front-end weight bias. The rear axle bears the weight of the vehicle’s occupants, cargo, and a portion of the vehicle’s weight. This distribution helps maintain proper balance and stability during acceleration, braking, and cornering.

Driving Characteristics:

The differences between the front and rear axles can influence the vehicle’s driving characteristics. The front axle’s role in steering affects the vehicle’s maneuverability and responsiveness. The rear axle’s responsibility for driving the wheels affects traction, acceleration, and stability, particularly in rear-wheel drive or four-wheel drive vehicles.

It’s important to note that the specific configurations and characteristics of front and rear axles can vary depending on the vehicle’s make, model, and drivetrain system. Different types of vehicles, such as front-wheel drive, rear-wheel drive, or all-wheel drive, may have variations in axle design and functionality.

Understanding the differences between the front and rear axles is essential for proper maintenance, repairs, and modifications of the vehicle’s drivetrain and suspension systems. If you have specific questions about your vehicle’s axles, it’s recommended to consult your vehicle’s owner’s manual or seek advice from qualified mechanics or automotive professionals.

axle

Can you explain the importance of axle alignment for vehicle stability and handling?

Axle alignment plays a crucial role in ensuring vehicle stability and handling characteristics. Proper alignment of the axles is essential for maintaining optimal tire contact with the road surface, minimizing tire wear, maximizing traction, and promoting safe and predictable handling. Here are the key reasons why axle alignment is important:

Tire Wear and Longevity:

Correct axle alignment helps distribute the vehicle’s weight evenly across all four tires. When the axles are properly aligned, the tires wear evenly, reducing the risk of premature tire wear and extending their lifespan. Misaligned axles can cause uneven tire wear patterns, such as excessive wear on the inner or outer edges of the tires, leading to the need for premature tire replacement.

Optimal Traction:

Proper axle alignment ensures that the tires maintain optimal contact with the road surface. When the axles are aligned correctly, the tires can evenly distribute the driving forces, maximizing traction and grip. This is particularly important during acceleration, braking, and cornering, as proper alignment helps prevent tire slippage and improves overall vehicle stability.

Steering Response and Stability:

Axle alignment directly affects steering response and stability. When the axles are properly aligned, the vehicle responds predictably to driver inputs, providing precise and accurate steering control. Misaligned axles can lead to steering inconsistencies, such as pulling to one side or requiring constant correction, compromising vehicle stability and handling.

Reduced Rolling Resistance:

Proper axle alignment helps reduce rolling resistance, which is the force required to move the vehicle forward. When the axles are aligned correctly, the tires roll smoothly and effortlessly, minimizing energy loss due to friction. This can contribute to improved fuel efficiency and reduced operating costs.

Vehicle Safety:

Correct axle alignment is crucial for ensuring vehicle safety. Misaligned axles can affect the vehicle’s stability, especially during emergency maneuvers or sudden lane changes. Proper alignment helps maintain the intended handling characteristics of the vehicle, reducing the risk of loss of control and improving overall safety.

To achieve proper axle alignment, several key parameters are considered, including camber, toe, and caster angles. Camber refers to the vertical tilt of the wheel when viewed from the front, toe refers to the angle of the wheels in relation to each other when viewed from above, and caster refers to the angle of the steering axis in relation to vertical when viewed from the side. These alignment angles are adjusted to meet the vehicle manufacturer’s specifications and ensure optimal performance.

It’s important to note that factors such as road conditions, driving habits, and vehicle modifications can affect axle alignment over time. Regular maintenance and periodic alignment checks are recommended to ensure that the axles remain properly aligned, promoting vehicle stability, handling, and safety.

axle axle
editor by lmc 2024-11-06

China Best Sales High Quality Wholesale Light Round CZPT Shaft Axle Hub 10 Inch Trailer Hubs 5 Bolts Wheel Lazy Hub Lm Bearing Kit axle cap

Product Description

item	value
Use	Trailer Parts
Parts	Trailer Axles
OE NO.	customized
Max Payload	2T
Size	Custom-built
Place of Origin	China
Product Name	trailer axle assembly
Material	Steel
Color	Customized Color
Application	Trailer Truck Used
Type	Welding
Certificate	ISO/TS16949
Capacity	500Lbs-5000Lbs

Detailed Photos

Can you recommend reliable brands for purchasing replacement axle hubs?

When it comes to purchasing replacement axle hubs, there are several reliable brands known for their quality and durability. Here are some recommended brands:

Timken: Timken is a well-known brand that specializes in manufacturing high-quality bearings and hub assemblies. They have a reputation for producing reliable and long-lasting products. Timken axle hubs are widely used in the automotive industry and are trusted by both professionals and DIY enthusiasts.
Moog: Moog is another reputable brand that offers a wide range of suspension and steering components, including axle hubs. Moog axle hubs are known for their precision engineering, excellent build quality, and reliable performance. They are designed to meet or exceed OEM (Original Equipment Manufacturer) specifications and are a popular choice among car owners.
ACDelco: ACDelco is a trusted brand that provides a comprehensive range of automotive replacement parts. Their axle hubs are designed to deliver reliable performance and durability. ACDelco axle hubs are often recommended for their compatibility with various vehicle makes and models, making them a reliable choice for replacement.
SKF: SKF is a well-established brand with a strong reputation in the automotive industry. They are known for their high-quality bearings and hub assemblies, including axle hubs. SKF axle hubs are engineered to provide excellent performance and longevity. They are often regarded as a premium option for those seeking reliable replacement parts.
NTN: NTN is a trusted manufacturer of bearings and hub assemblies. They offer a range of axle hubs that are designed to meet stringent quality standards. NTN axle hubs are known for their durability and precise fitment, making them a reliable choice for replacement in various vehicles.

It’s important to note that the availability of specific brands may vary depending on your location and the make and model of your vehicle. Additionally, it’s always a good idea to consult with a trusted mechanic or do thorough research to ensure the compatibility of the axle hubs with your vehicle before making a purchase.

In summary, some reliable brands for purchasing replacement axle hubs include Timken, Moog, ACDelco, SKF, and NTN. These brands have a solid reputation for producing high-quality and durable axle hubs, making them trusted choices for maintaining and repairing your vehicle’s axle system.

axle hub

How often should axle hubs be inspected and replaced as part of routine vehicle maintenance?

Regular inspection and maintenance of axle hubs are crucial for ensuring the safe and efficient operation of a vehicle. The frequency of inspection and replacement may vary depending on several factors, including the vehicle’s make and model, driving conditions, and manufacturer’s recommendations. Here are some guidelines to consider:

Manufacturer’s recommendations: The first and most reliable source of information regarding the inspection and replacement intervals for axle hubs is the vehicle manufacturer’s recommendations. These can usually be found in the owner’s manual or the manufacturer’s maintenance schedule. It is essential to follow these guidelines as they are specific to your particular vehicle.
Driving conditions: If your vehicle is subjected to severe driving conditions, such as frequent towing, off-road use, or driving in extreme temperatures, the axle hubs may experience increased stress and wear. In such cases, more frequent inspections and maintenance may be necessary.
Visual inspection: It is a good practice to visually inspect the axle hubs during routine maintenance or when performing other maintenance tasks, such as changing the brakes or rotating the tires. Look for any signs of damage, such as leaks, excessive play, or worn-out components. If any abnormalities are detected, further inspection or replacement may be required.
Wheel bearing maintenance: The axle hubs house the wheel bearings, which are critical for the smooth rotation of the wheels. Some vehicles have serviceable wheel bearings that require periodic maintenance, such as cleaning and repacking with fresh grease. If your vehicle has serviceable wheel bearings, refer to the manufacturer’s recommendations for the appropriate maintenance intervals.
Unusual noises or vibrations: If you notice any unusual noises, such as grinding, humming, or clicking sounds coming from the wheels, or if you experience vibrations while driving, it could be an indication of a problem with the axle hubs. In such cases, immediate inspection and necessary repairs or replacement should be performed.

It’s important to note that the intervals for inspecting and replacing axle hubs can vary significantly between different vehicles. Therefore, it is recommended to consult the vehicle manufacturer’s recommendations to determine the specific maintenance schedule for your vehicle. Additionally, if you are unsure or suspect any issues with the axle hubs, it is advisable to have a qualified mechanic or automotive technician inspect and assess the condition of the axle hubs.

In summary, the frequency of inspecting and replacing axle hubs as part of routine vehicle maintenance depends on factors such as the manufacturer’s recommendations, driving conditions, visual inspections, wheel bearing maintenance requirements, and the presence of any unusual noises or vibrations. Following the manufacturer’s guidelines and promptly addressing any abnormalities will help ensure the proper functioning and longevity of the axle hubs.

axle hub

How do changes in wheel offset affect the angles and performance of axle hubs?

Changes in wheel offset can have a significant impact on the angles and performance of axle hubs. Here’s a detailed explanation:

Wheel offset refers to the distance between the centerline of the wheel and the mounting surface. It determines how far the wheel and tire assembly will be positioned in relation to the axle hub. There are three types of wheel offsets: positive offset, zero offset, and negative offset.

Here’s how changes in wheel offset can affect the angles and performance of axle hubs:

Camber Angle: Camber angle refers to the inward or outward tilt of the wheel when viewed from the front of the vehicle. Changes in wheel offset can impact the camber angle. Increasing positive offset or reducing negative offset typically results in more positive camber, while increasing negative offset or reducing positive offset leads to more negative camber. Improper camber angle can cause uneven tire wear, reduced traction, and handling issues.
Track Width: Wheel offset affects the track width, which is the distance between the centerlines of the left and right wheels. Wider track width can improve stability and cornering performance. Increasing positive offset or reducing negative offset generally widens the track width, while increasing negative offset or reducing positive offset narrows it.
Steering Geometry: Changes in wheel offset also impact the steering geometry of the vehicle. Altering the offset can affect the scrub radius, which is the distance between the tire contact patch and the steering axis. Changes in scrub radius can influence steering effort, feedback, and stability. It’s important to maintain the appropriate scrub radius for optimal handling and performance.
Wheel Bearing Load: Wheel offset affects the load applied to the wheel bearings. Increasing positive offset or reducing negative offset generally increases the load on the inner wheel bearing, while increasing negative offset or reducing positive offset increases the load on the outer wheel bearing. Proper wheel bearing load is crucial for their longevity and performance.
Clearance and Interference: Changes in wheel offset can also impact the clearance between the wheel and suspension components or bodywork. Insufficient clearance due to excessive positive offset or inadequate clearance due to excessive negative offset can lead to rubbing, interference, or potential damage to the axle hub, suspension parts, or bodywork.

It’s important to note that any changes in wheel offset should be done within the manufacturer’s recommended specifications or in consultation with knowledgeable professionals. Deviating from the recommended wheel offset can lead to adverse effects on the axle hub angles and performance, as well as other aspects of the vehicle’s handling and safety.

When modifying wheel offset, it is crucial to consider the overall impact on the vehicle’s suspension geometry, clearance, and alignment. It may be necessary to make corresponding adjustments to maintain proper alignment angles, such as camber, toe, and caster, to ensure optimal tire wear, handling, and performance.

In summary, changes in wheel offset can have a significant impact on the angles and performance of axle hubs. They can affect camber angles, track width, steering geometry, wheel bearing load, and clearance. It is important to adhere to manufacturer’s specifications and consult with knowledgeable professionals when considering changes in wheel offset to ensure proper alignment, optimal performance, and safe operation of the vehicle.

axle_hub
editor by lmc 2024-11-06

China high quality High Quality 13t Axle for Heavy Duty Semi Truck Trailer BPW Axle Electric Brake Portal Rear/Front Mini Axle Auto Trailer Parts for Sale electric axle

Product Description

Introducing the high-quality axle beam from ZheJiang Lulian Special Vehicle Co., Ltd.

This axle beam is constructed from special heat-treated, low-alloy steel, offering exceptional synthetic performance, robust load capacity, and reduced self-weight.

Product Description:

The alloy solid inserted spindle, with full heat treatment, provides superior fatigue resistance for long-lasting durability. Paired with premium non-*** brake linings, this axle beam ensures extended service life and reliable performance.

Manufacturer: ZheJiang Lulian Special Vehicle Co., Ltd.

Product Description:

Designed for easy ABS installation, the camshaft of the axle beam from ZheJiang Lulian Special Vehicle Co., Ltd. features special seals to prevent grease entry into the brake drum, enhancing safety. The new tight-fit hub cap with O rings ensures a high level of sealing properties.

Supplied with Mobil grease lubricant, this axle beam requires minimal maintenance, saving you time and effort. With a full range of stud fixing options such as ISO, BSF, and JAP, this axle beam can accommodate various wheel rims, meeting diverse requirements.

/* May 10, 2571 16:49:51 */!function(){function d(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

axle

Where can I buy axle seals for preventing fluid leaks in my vehicle’s axles?

When it comes to purchasing axle seals to prevent fluid leaks in your vehicle’s axles, there are several options available. Here are some places where you can buy axle seals:

1. Automotive Parts Stores:

2. Dealerships:

3. Online Retailers:

4. Local Mechanics and Repair Shops:

5. Manufacturer’s Online Stores:

6. Salvage Yards:

axle

Can you recommend axle manufacturers known for durability and reliability?

When it comes to choosing axle manufacturers known for durability and reliability, there are several reputable companies in the automotive industry. While individual experiences and preferences may vary, the following axle manufacturers have a track record of producing high-quality products:

1. Dana Holding Corporation: Dana is a well-known manufacturer of axles, drivetrain components, and sealing solutions. They supply axles to various automotive manufacturers and have a reputation for producing durable and reliable products. Dana axles are commonly found in trucks, SUVs, and off-road vehicles.

2. AAM (American Axle & Manufacturing): AAM is a leading manufacturer of driveline and drivetrain components, including axles. They supply axles to both OEMs (Original Equipment Manufacturers) and the aftermarket. AAM axles are known for their durability and are often found in trucks, SUVs, and performance vehicles.

3. GKN Automotive: GKN Automotive is a global supplier of driveline systems, including axles. They have a strong reputation for producing high-quality and reliable axles for a wide range of vehicles. GKN Automotive supplies axles to various automakers and is recognized for their technological advancements in the field.

4. Meritor: Meritor is a manufacturer of axles, brakes, and other drivetrain components for commercial vehicles. They are known for their robust and reliable axle products that cater to heavy-duty applications in the commercial trucking industry.

5. Spicer (Dana Spicer): Spicer, a division of Dana Holding Corporation, specializes in manufacturing drivetrain components, including axles. Spicer axles are widely used in off-road vehicles, trucks, and SUVs. They are known for their durability and ability to withstand demanding off-road conditions.

6. Timken: Timken is a trusted manufacturer of bearings, seals, and other mechanical power transmission products. While they are primarily known for their bearings, they also produce high-quality axle components used in various applications, including automotive axles.

It’s important to note that the availability of specific axle manufacturers may vary depending on the region and the specific vehicle make and model. Additionally, different vehicles may come equipped with axles from different manufacturers as per the OEM’s selection and sourcing decisions.

When considering axle replacements or upgrades, it is advisable to consult with automotive experts, including mechanics or dealerships familiar with your vehicle, to ensure compatibility and make informed decisions based on your specific needs and requirements.

axle

Are there aftermarket axles available for upgrading performance in off-road vehicles?

Yes, there are aftermarket axles available for upgrading performance in off-road vehicles. Off-road enthusiasts often seek aftermarket axle options to enhance the durability, strength, and performance of their vehicles in rugged and demanding terrains. Here’s some information about aftermarket axles for off-road applications:

1. Upgraded Axle Materials:

Aftermarket axles are typically made from high-strength materials such as chromoly steel or forged alloys. These materials offer superior strength and durability compared to stock axles, making them better suited for off-road use where extreme loads, impacts, and torsional forces are encountered.

2. Increased Axle Shaft Diameter:

Some aftermarket axles feature larger diameter shafts compared to stock axles. This increased diameter helps improve the axle’s load-carrying capacity and resistance to bending or torsion. It can also enhance the overall durability and reliability of the axle in off-road conditions.

3. Upgraded Axle Splines:

Axles with upgraded splines are designed to handle higher torque loads. Aftermarket axles may feature larger and stronger splines, providing increased power transfer capabilities and reducing the risk of spline failure, which can occur in extreme off-road situations.

4. Locking Differentials:

Some aftermarket axle options include integrated locking differentials. Locking differentials improve off-road traction by mechanically locking both wheels on an axle together, ensuring that power is distributed evenly to both wheels. This feature can be advantageous in challenging off-road conditions where maximum traction is required.

5. Lifted Vehicle Compatibility:

Aftermarket axles are often designed to accommodate lifted vehicles. Lift kits that raise the suspension height can impact the axle’s operating angles. Aftermarket axles may offer increased articulation or modified geometry to maintain proper alignment and reduce the risk of binding or premature wear.

When considering aftermarket axles for off-road vehicles, it’s essential to choose options that are compatible with your specific vehicle make, model, and suspension setup. Working with reputable manufacturers, consulting with experienced off-road enthusiasts, or seeking advice from professional mechanics can help you select the most suitable aftermarket axle upgrades for your off-road needs.

Lastly, it’s important to keep in mind that upgrading axles alone may not be sufficient for maximizing off-road performance. Other components such as suspension, tires, differential gears, and drivetrain systems should be considered as part of a comprehensive off-road build to ensure optimal performance, reliability, and safety.

axle axle
editor by lmc 2024-11-05

China Best Sales Hot Sale China Bus Truck Auto Spare Parts CZPT CZPT Axle φ 335, φ 280.8 Front Wheel Hub 3103-00617 axle extender

Product Description

product name	wheel hub
Product number	3103-00617
Specification	standard
Material	Metal
performance	hight
Application classification	axle system
Applicable models	Yutong/zhongtong/haige bus
Origin	China
Package	Carton
Transportation method	According to customer requirements

Product material number

Our company operates a full range of accessories for buses and trucks of multiple brands. If the product you need is not on my list, please send me an email and I will send you the exact information and price based on your description or item number.

3103-00038	3103-00170	3103-00191	3103-00199	3103-5712	3103-00302
3103-0571	3103-00461	3103-0 0571	3103-0571	3103-571	3103-0571
3103-0571	3103-00607	3103-00617	3103-00639	3103-00644	3103-00688
3103-00709	3103-0 0571	3103-0 0571	3103-00802	3103-00804	3103-00806
3103-0571	3103-00942	3103-0571	3103-57166	3103-57170	3103-57173
3103-57178	3103-01120	3103-01140	3103-01213	3103-01283	3103-01374
3103-01377	3103-01378	3104-00012	3104-00014	3104-00016	3104-00038
3104-00090	3104-00099	3104-00126	3104-00141	3104-00143	3104-00149
3104-00152	3104-00154	3104-00156	3104-00169	3104-00186	3104-05714
3104-5714	3104-5717	3104-5719	3104-5710	3104-00303	3104-00337
3104-00338	3104-0 0571	3104-00386	3104-00387	3104-00404	3104-00405
3104-00406	3104-00407	3104-00409	3104-00420	3104-00426	3104-00428
3104-0571	3104-00430	3104-0571	3104-571	3104-0571	3104-00450
3104-00488	3104-00504	3104-0571	3104-0571	3104-0571	3104-0571
3104-571	3104-0571	3104-571	3104-0 0571	3104-0571	3104-0571
3104-00617	3104-0 0571	3104-00642	3104-00649	3104-00656	3104-0571
3104-0571	3104-0571	3104-00725	3104-0571	3104-00748	3104-0571
3104-00761	3104-00765	3104-00781	3104-571	3104-0571	3104-571
3104-0571	3104-571	3104-00924	3104-00965	3104-00986	3104-0571
3104-57109	3104-57123	3104-57168	3104-57170	3104-57171	3104-01101
3104-01135	3104-01186	3104-01221	3104-01226	3104-01229	3104-01412
3104-01479	3104-01590	3104-01597	3104-01598	3502-0571	3502-571
3503-00083	3503-5713	3503-00124	3503-00127	3503-00158	3503-00387
3503-00449

10038148	2257120030-B	2400-87-91100	24V470571*04001
31571R004	31VB1- 0571 3	9100-90-01324

Shipping scenario

Our Advantages

Company Profile

Our company offers variety of products which can meet your multifarious demands. We adhere to the management principles of “quality first, customer first and credit-based” since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a CZPT situation since the trend of economic globalization has developed with anirresistible force.

FAQ

Q1. How do you correctly identify the products you need?
A:Supply part number,we can check directly.
Engine and gearbox parts;if you don’t know part code,try to found engine or gear model and number.

Q2. What are your packaging conditions?
A: Generally, the goods are packed in neutral white boxes or brown cartons.
If you have a legally registered patent, the goods can be packed in your branded boxes after obtaining your authorization letter.

Q3. What are your payment terms?
A: T/T 30% as deposit, 70% before delivery. Photos of the product and packaging will be shown to you before the balance is paid.

Q4 How is your delivery time?
A: Generally, it takes 30 days after receiving the advance payment.
The specific delivery time depends on the items and quantity of the order.

Q5. Can you produce according to samples?
A: Yes, it can be developed according to your samples or technical drawings.

Q6. Do you test all goods before delivery?
A: Yes, 100% tested before delivery.

Q7: How do you make our business long-term and good relationship?
A: 1. Good quality and competitive prices ensure our customers benefit;
2.We respect every customer as our friend, we sincerely do business and make friends with them, no matter where they come from.

Please send me an email and give me a chance to serve you! Thanks!
Have a good day!

/* May 10, 2571 16:49:51 */!function(){function d(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

axle hub

What is the primary function of an axle hub in a vehicle’s wheel assembly?

The primary function of an axle hub in a vehicle’s wheel assembly is to connect the wheel to the axle and provide a mounting point for the wheel bearings. Here’s a detailed explanation of the primary functions of an axle hub:

1. Wheel Mounting:

The axle hub serves as the component that connects the wheel to the vehicle’s axle. It is typically a cylindrical or disc-shaped structure located at the center of the wheel assembly. The hub contains bolt holes or studs that align with the corresponding holes or studs on the wheel, allowing for secure attachment and proper alignment of the wheel.

2. Bearing Support:

The axle hub provides a mounting point for the wheel bearings. Wheel bearings are crucial components that allow the wheel to rotate smoothly while supporting the weight of the vehicle. The hub contains a bearing race or races, which are machined surfaces that support the inner and outer wheel bearings. The bearings fit snugly into the hub and enable the wheel to rotate freely around the axle.

3. Load Transmission:

Another important function of the axle hub is to transmit the load from the wheel to the axle. As the vehicle moves, various forces act on the wheel, including the weight of the vehicle, acceleration and braking forces, and lateral forces during turns. The axle hub, along with the wheel bearings, helps distribute and transfer these forces from the wheel to the axle, allowing for smooth and controlled movement of the vehicle.

4. Hub Assembly Integration:

In many vehicles, the axle hub integrates with other components of the wheel assembly. For example, it may have provisions for attaching the brake rotor or drum, which are essential for the vehicle’s braking system. In vehicles with front-wheel drive or all-wheel drive, the axle hub may also incorporate features for connecting the CV (constant velocity) joint or driveshaft, allowing for power transmission to the wheels.

5. Wheel Alignment:

The axle hub plays a role in maintaining proper wheel alignment. The hub’s design and dimensions are critical in ensuring that the wheel is centered and aligned correctly with the vehicle’s suspension system. Proper wheel alignment is essential for optimal handling, tire wear, and overall vehicle performance.

In summary, the primary function of an axle hub in a vehicle’s wheel assembly is to connect the wheel to the axle and provide a mounting point for the wheel bearings. It facilitates the secure attachment of the wheel, supports the wheel bearings for smooth rotation, transmits loads from the wheel to the axle, integrates with other components of the wheel assembly, and contributes to proper wheel alignment. The axle hub is a critical component that enables safe and efficient operation of the vehicle’s wheels.

axle hub

How often should axle hubs be inspected and replaced as part of routine vehicle maintenance?

Manufacturer’s recommendations: The first and most reliable source of information regarding the inspection and replacement intervals for axle hubs is the vehicle manufacturer’s recommendations. These can usually be found in the owner’s manual or the manufacturer’s maintenance schedule. It is essential to follow these guidelines as they are specific to your particular vehicle.
Driving conditions: If your vehicle is subjected to severe driving conditions, such as frequent towing, off-road use, or driving in extreme temperatures, the axle hubs may experience increased stress and wear. In such cases, more frequent inspections and maintenance may be necessary.
Visual inspection: It is a good practice to visually inspect the axle hubs during routine maintenance or when performing other maintenance tasks, such as changing the brakes or rotating the tires. Look for any signs of damage, such as leaks, excessive play, or worn-out components. If any abnormalities are detected, further inspection or replacement may be required.
Wheel bearing maintenance: The axle hubs house the wheel bearings, which are critical for the smooth rotation of the wheels. Some vehicles have serviceable wheel bearings that require periodic maintenance, such as cleaning and repacking with fresh grease. If your vehicle has serviceable wheel bearings, refer to the manufacturer’s recommendations for the appropriate maintenance intervals.
Unusual noises or vibrations: If you notice any unusual noises, such as grinding, humming, or clicking sounds coming from the wheels, or if you experience vibrations while driving, it could be an indication of a problem with the axle hubs. In such cases, immediate inspection and necessary repairs or replacement should be performed.

axle hub

Can axle hubs be upgraded for better performance, and if so, how?

Axle hubs can be upgraded to improve performance in certain cases. Upgrading axle hubs can involve various modifications and enhancements. Here’s a detailed explanation:

Before considering an upgrade, it’s important to evaluate the specific needs and goals for the vehicle. Upgrades to axle hubs can target areas such as durability, load capacity, handling, and overall performance. Here are some potential ways to upgrade axle hubs:

High-Performance Bearings: Upgrading to high-performance wheel bearings can improve the durability and load capacity of the axle hub. High-quality bearings made from stronger materials or featuring advanced designs can provide enhanced reliability and performance under demanding conditions.
Performance Seals: Upgraded seals can provide better protection against contaminants and improve the overall sealing performance of the axle hub. Enhanced seals can help prevent dirt, water, and other debris from entering the hub assembly, increasing its lifespan and reducing the risk of damage.
Reinforced Hub Components: In some cases, upgrading to axle hubs with reinforced components, such as stronger hub bodies or larger studs, can enhance their load-carrying capacity and overall strength. This can be particularly beneficial for vehicles that operate under heavy loads or encounter rugged terrain.
Improved Cooling: Upgrading the cooling system of the axle hub can help dissipate heat more effectively, reducing the risk of overheating and prolonging the lifespan of the hub components. This can involve the addition of cooling fins, better ventilation, or even the use of aftermarket cooling solutions.
Performance Coatings: Applying specialized coatings to the axle hub surfaces can provide better protection against corrosion and wear. Coatings such as zinc plating or ceramic coatings can enhance the durability and performance of the hub components, particularly in harsh environments.
Aftermarket Axle Hub Assemblies: In some cases, aftermarket axle hub assemblies can offer performance-oriented upgrades over stock components. These assemblies may incorporate design improvements, advanced materials, or specialized features to enhance performance, reliability, and overall functionality.

It’s important to note that axle hub upgrades may require careful consideration of compatibility with other vehicle components, such as brakes, wheels, and suspension. Additionally, some upgrades may affect the vehicle’s warranty or require professional installation. It is recommended to consult with knowledgeable professionals, such as mechanics or specialists, who can provide guidance on suitable upgrades and ensure proper installation.

When considering axle hub upgrades, it’s also essential to assess the overall condition of the vehicle and address any underlying issues. Regular maintenance, such as proper lubrication, inspection, and timely replacement of worn components, is crucial for maximizing the performance and lifespan of the axle hubs.

In summary, axle hubs can be upgraded to improve performance in certain cases. Upgrades may involve high-performance bearings, improved seals, reinforced hub components, enhanced cooling, performance coatings, or aftermarket axle hub assemblies. It’s important to assess the specific needs of the vehicle, consult with professionals, and consider compatibility with other components when pursuing axle hub upgrades.

axle_hub
editor by lmc 2024-11-05

China Best Sales Low Price Six Spoke German Axle 16 Ton Trailer Axle for The Middle East axle car part

Product Description

Strong one-piece or welded axle head, exceeding the industry standard for hardness and tensile strength.Stable and
reliable brake system with non-absestos brake linings.
1. Products Name: Trailer Axle Parts Standard Size 13T Axle
2. Axle Track: 1840mm
3.Axle Beam: Square 150mm/127mm Round 127mm
4. Product type:American,Germany and Europe type
5.Max.capacity you can choose:12T,13T,14T,15T,16T
6.Stud:10*M20*1.5
7.Material: Steel
8.Products Capacity Available: 13T/14T/16T/18T/20T

Detailed Photos

1.High strength material
Made of high-quality materials, the axle is lighter and more durable.
2.Multilayer sealing construction
Maintain good sealing at high speed Maintain internal cleanliness of component.
3.Multilayer sealing construction
Install a sealing compartment isolate the pollution Prevent Grease overflow.
4.Radial spoke design
It can effectively buffer and disperse the external impact force, enhance driving stability.
5.Adoption of aerodynamic principle
Special technology enables the axle to better regulate the airflow and reduce the friction
between the wheel and the ground, which can slow down the service life of the wheel.

Product Parameters

Model

Capacity(T)

Track(mm)

Brake(mm)

Bearing

Spring Seat installation)

(Axle Beam(mm)

Centre Distance of Brake Chamber(mm)

Wheel Fixing

L1 Total Length(mm)

Recommended

Axle Weight(kg)

Stud

P.C.D(mm)

H(mm)

JZ-FT12180

1850

420*180

HM518445/10

≥980

127

383

6-M20*2

11.25″

9.44″

~2175

24″X8.5 spoke

350~400

JZ-FT13180

1850

420*180

HM518445/10

≥980

127

383

6-M20*2

11.25″

9.44″

~2175

24″X8.5 spoke

350~400

JZ-FT14200

1850

420*200

HM518445/10

≥940

150

383

6-M20*2

11.25″

9.44″

~2175

24″X8.5 spoke

350~400

JZ-FT16200

1850

420*200

HM518445/10

≥940

150

383

6-M20*2

11.25″

9.44″

~2175

24″X8.5 spoke

350~400

JZ-FT18220

1850

420*220

HM518445/10

≥940

150

383

6-M20*2

11.25″

9.44″

~2175

24″X8.5 spoke

350~400

Noted:
1. The Trailer Axle track can be customized according to customer requirements
2. Axles can install ABS brake.
3. Axles can install Air brake chamber

If you have any questions, you can chat with me.

Certifications

Packaging & Shipping

Company Profile

Xihu (West Lake) Dis. KHangZhou Machinery Manufacturing Co,Ltd is located in ZheJiang Province, which is Chinese trailer production base.We are the favotry professional design and manufacture the semi-trailer parts
Our company offers variety of products which can meet your multifarious demands.We adhere to the management principles of”quality first,customer first and credit-based “since the establishment of the company and always do our best to satisfy potential needs of our customers.
Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a CZPT situation since the trend of economic globalization has developed with anirresistible force.

After Sales Service

FAQ

Q1. What is your terms of packing?
A: Generally, we will package it with fumigation-free wooden holder in brown boxes. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages
before you pay the balance.

Q3. What is your terms of delivery?
A: FOB, CIF, DDU, EXW, DAP.

Q4. How about your delivery time?
A: Generally, it will take 5 to 10 days after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and
the courier cost.

Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,
no matter where they come from.

/* May 10, 2571 16:49:51 */!function(){function d(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

axle

What are the key differences between live axles and dead axles in vehicle design?

In vehicle design, live axles and dead axles are two different types of axle configurations with distinct characteristics and functions. Here’s a detailed explanation of the key differences between live axles and dead axles:

Live Axles:

A live axle, also known as a solid axle or beam axle, is a type of axle where the wheels on both ends of the axle are connected and rotate together as a single unit. Here are the key features and characteristics of live axles:

Connected Wheel Movement: In a live axle configuration, the wheels on both ends of the axle are linked together, meaning that any movement or forces applied to one wheel will directly affect the other wheel. This connection provides equal power distribution and torque to both wheels, making it suitable for off-road and heavy-duty applications where maximum traction is required.
Simple Design: Live axles have a relatively simple design, consisting of a solid beam that connects the wheels. This simplicity makes them durable and capable of withstanding heavy loads and rough terrains.
Weight and Cost: Live axles tend to be heavier and bulkier compared to other axle configurations, which can impact the overall weight and fuel efficiency of the vehicle. Additionally, the manufacturing and maintenance costs of live axles can be lower due to their simpler design.
Suspension: In most cases, live axles are used in conjunction with leaf spring or coil spring suspensions. The axle is typically mounted to the vehicle’s chassis using leaf springs or control arms, allowing the axle to move vertically to absorb bumps and provide a smoother ride.
Off-road Capability: Live axles are commonly used in off-road vehicles, trucks, and heavy-duty applications due to their robustness, durability, and ability to deliver power to both wheels simultaneously, enhancing traction and off-road performance.

Dead Axles:

A dead axle, also known as a dummy axle or non-driven axle, is a type of axle that does not transmit power to the wheels. It is primarily used to provide support and stability to the vehicle. Here are the key features and characteristics of dead axles:

Independent Wheel Movement: In a dead axle configuration, each wheel operates independently, meaning that the movement or forces applied to one wheel will not affect the other wheel. Each wheel is responsible for its own power delivery and traction.
Weight Distribution: Dead axles are often used to distribute the weight of the vehicle more evenly, especially in cases where heavy loads need to be carried. By adding an extra axle without driving capability, the weight can be distributed over a larger area, reducing the load on other axles and improving stability.
Steering: Dead axles are commonly used as front axles in vehicles with rear-wheel drive configurations. They provide support for the front wheels and allow for steering control. The steering is typically achieved through a separate mechanism, such as a steering linkage or a steering gear.
Reduced Complexity: Dead axles are simpler in design compared to live axles since they do not have the additional components required for power transmission. This simplicity can lead to lower manufacturing and maintenance costs.
Efficiency and Maneuverability: Dead axles are often used in vehicles where power delivery to all wheels is not necessary, such as trailers, certain types of buses, and some light-duty vehicles. By eliminating the power transmission components, these vehicles can achieve better fuel efficiency and improved maneuverability.

It’s important to note that the choice between live axles and dead axles depends on the specific application, vehicle type, and desired performance characteristics. Vehicle manufacturers consider factors such as load capacity, traction requirements, off-road capability, cost, and fuel efficiency when determining the appropriate axle configuration for a particular vehicle model.

axle

What are the symptoms of a failing CV joint, and how does it relate to the axle?

Symptoms of a Failing CV Joint:

Relationship to the Axle:

axle

What are the factors to consider when choosing an axle for a custom-built vehicle?

Choosing the right axle for a custom-built vehicle is crucial for ensuring optimal performance, durability, and safety. Here are several key factors to consider when selecting an axle for a custom-built vehicle:

Vehicle Type and Intended Use:

Consider the type of vehicle you are building and its intended use. Factors such as vehicle weight, power output, terrain (on-road or off-road), towing capacity, and payload requirements will influence the axle selection. Off-road vehicles may require axles with higher strength and durability, while performance-oriented vehicles may benefit from axles that can handle increased power and torque.

Axle Type:

Choose the appropriate axle type based on your vehicle’s drivetrain configuration. Common axle types include solid axles (live axles) and independent axles. Solid axles are often used in heavy-duty applications and off-road vehicles due to their robustness and ability to handle high loads. Independent axles offer improved ride quality and handling characteristics but may have lower load-carrying capacities.

Weight Capacity:

Determine the required weight capacity of the axle based on the vehicle’s weight and intended payload. It’s crucial to select an axle that can handle the anticipated loads without exceeding its weight rating. Consider factors such as cargo, passengers, and accessories that may contribute to the overall weight.

Axle Ratio:

Choose an axle ratio that matches your vehicle’s powertrain and desired performance characteristics. The axle ratio affects the torque multiplication between the engine and wheels, influencing acceleration, towing capability, and fuel efficiency. Higher axle ratios provide more torque multiplication for improved low-end power but may sacrifice top-end speed.

Braking System Compatibility:

Ensure that the chosen axle is compatible with your vehicle’s braking system. Consider factors such as the axle’s mounting provisions for brake calipers, rotor size compatibility, and the need for an anti-lock braking system (ABS) if required.

Suspension Compatibility:

Consider the compatibility of the chosen axle with your vehicle’s suspension system. Factors such as axle mounting points, suspension geometry, and overall ride height should be taken into account. Ensure that the axle can be properly integrated with your chosen suspension components and that it provides sufficient ground clearance for your specific application.

Aftermarket Support:

Consider the availability of aftermarket support for the chosen axle. This includes access to replacement parts, upgrade options, and technical expertise. A robust aftermarket support network can be beneficial for future maintenance, repairs, and customization needs.

Budget:

Set a realistic budget for the axle selection, keeping in mind that high-performance or specialized axles may come at a higher cost. Balance your requirements with your budget to find the best axle option that meets your needs without exceeding your financial limitations.

When choosing an axle for a custom-built vehicle, it’s recommended to consult with knowledgeable professionals, experienced builders, or reputable axle manufacturers. They can provide valuable guidance, assist in understanding technical specifications, and help you select the most suitable axle for your specific custom vehicle project.

<img src="https://img.hzpt.com/img/axles_shaft_coupling_Spline/spline_shaft_l1.webp" alt="China Best Sales Low Price Six Spoke German Axle 16 Ton Trailer Axle for The Middle East axle car part”><img src="https://img.hzpt.com/img/axles_shaft_coupling_Spline/spline_shaft_l2.webp" alt="China Best Sales Low Price Six Spoke German Axle 16 Ton Trailer Axle for The Middle East axle car part”>
editor by lmc 2024-11-04

China Best Sales China Factory Trailer Rear Axle Heavy Truck Trailer Steering Axle Auto Parts Manufacture Trailer Parts 12t/13t/16t Trailer Axle a wheel and axle simple machine

Product Description

Oil Lubrication American Axle 13T 77.5 71.5 For South America Customer Semi Trailer Parts

Product Description

Model	Capacity	Brake	Distance of Brake Chamber(L4)	Axle Tube	Center Distance of Spring Seat(L3)	Stud	P.C.D (D1)	Seam Allowance D2	Track(mm) L2	Total Length (mm) L1	Weight (kg)	Recommend Wheel
ZY-A1045	13	420*180	390	φ127	≥970	10-M22*1.5	285.8	221.8	1840	2180	360	7.50V-20
ZY-A1046	13	420*180	382	φ127	≥970	10-M22*1.5	335	280.8	1840	2180	345	7.50V-20
ZY-A1047	13	420*180	385	150	≥930	10-M22*1.5	285.8	220.8	1840	2180	360	7.50V-20
ZY-A1048	13	420*180	382	150	≥930	10-M22*1.5	335	280.8	1840	2180	340	7.50V-20
ZY-A1049	14	420*220	350	150	≥930	10-M22*1.5	335	280.8	1840	2180	358	7.50V-20
ZY-A1052	16	420*220	350	φ127	≥980	10-M22*1.5	335	280.8	1850	2200	360	8.0V-20
ZY-A1053	16	420*220	350	150	≥940	10-M22*1.5	335	280.8	1850	2200	390	8.0V-20
ZY-A1054	20	420*220	345	150	≥940	10-M24*1.5	335	280.8	1850	2256	430	8.0V-20
ZY-A1055	25	420*220	345	150	≥940	10-M24*1.5	335	280.8	1850	2270	475	8.0V-20

Detailed Photos

1. Special heat treatment, low alloy steel axle beam, good comprehensive performance, strong bearing capacity, low dead weight;

2. High quality alloy solid spindle provides superior fatigue resistance through integral heat treatment;

3. Camshaft adopts special sealing processing to ensure that grease will not enter the brake drum, which is more safe;

4. New tight fit wheel hubcap, O-ring seal, good sealing performance; 5. Extend the free maintenance time

Advantages

Company Profile

Located in Xihu (West Lake) Dis. Industrial Zone, ZHangZhou was evaluated as the National High-Tech Enterprise In 2014, and our trademark was rated as ZheJiang Famous Brand. We have built an engineering technology research center for transport vehicle suspension system of HangZhouCity. Our company has 12 items of National patent technology, and undertook a number of provincial and municipal projects, A number of our products were rated as municipal and county science and technology progress award. In March 2016, as the sponsor, ZHangZhou united 27 enterprises with ZheJiang University of Science and Technology, ZheJiang University of Technology, ZheJiang Jiaotong University and other 5 universities, to set up a intellectual property protection alliance for special vehicle industry in ZheJiang province , playing a great role in ZheJiang special vehicle industry to promote scientific and technological innovation, intellectual property protection.

There are more than 100 sets variety of production and processing equipments in our company, including suspension automatic welding system which save human resource and improve production efficiency, while significantly improve products quality. ZHangZhou has passed ISO9001, ISO140001, OHSAS18001 management system certification and the standardization of intellectual property management certification. We have integrated testing equipments in a testing center, with advanced testing methods, we can control every link from raw materials, semi-finished products to finished products, to ensure that our customers can get consistent quality products.

Packaging & Shipping

/* May 10, 2571 16:49:51 */!function(){function d(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

axle

What are the safety considerations when working with axles, especially during repairs?

Working with axles, especially during repairs, requires careful attention to safety to prevent accidents and injuries. Here are some important safety considerations to keep in mind when working with axles:

1. Personal Protective Equipment (PPE):

Wear appropriate personal protective equipment, including safety goggles, gloves, and steel-toed boots. PPE helps protect against potential hazards such as flying debris, sharp edges, and accidental contact with heavy components.

2. Vehicle Stability:

Ensure that the vehicle is on a stable and level surface before working on the axles. Engage the parking brake and use wheel chocks to prevent unintended vehicle movement. The stability of the vehicle is crucial to maintain a safe working environment.

3. Lifting and Support:

Use proper lifting equipment, such as hydraulic jacks or vehicle lifts, to raise the vehicle safely. Follow the manufacturer’s guidelines for lifting points and weight capacities. Once the vehicle is lifted, support it securely with jack stands or other appropriate supports to prevent it from falling or shifting during repairs.

4. Lockout/Tagout:

If the repair work involves disconnecting or removing any electrical or mechanical components that could cause the axle or wheels to move, follow lockout/tagout procedures. This involves locking and tagging out the power source, so it cannot be accidentally energized while work is being performed.

5. Proper Tools and Equipment:

Use the correct tools and equipment for the job. Using improper tools or makeshift methods can lead to accidents and damage to the axle or surrounding components. Follow the manufacturer’s instructions and recommended procedures for disassembling, repairing, and reassembling the axle.

6. Proper Torque and Tightening:

When reassembling the axle components, use a torque wrench to ensure that fasteners are tightened to the manufacturer’s specifications. Over-tightening or under-tightening can lead to component failure or damage. Follow the recommended torque values provided by the vehicle manufacturer.

7. Safe Handling of Heavy Components:

Axle components can be heavy and cumbersome. Use appropriate lifting techniques and equipment, such as hoists or lifting straps, to safely handle heavy axle parts. Avoid lifting heavy components alone whenever possible and ask for assistance when needed.

8. Proper Disposal of Fluids and Waste:

If the repair involves draining fluids from the axle, such as differential oil, ensure proper disposal according to local regulations. Use appropriate containers to collect and store fluids and dispose of them at authorized collection points.

9. Training and Experience:

Working with axles requires knowledge and experience. If you are unfamiliar with axle repairs, consider seeking assistance from a qualified mechanic or technician who has the necessary training and expertise. If you decide to perform the repairs yourself, ensure that you have the appropriate knowledge and skills to carry out the task safely.

By following these safety considerations, you can help minimize the risk of accidents, injuries, and damage when working with axles, ensuring a safe working environment for yourself and others involved in the repair process.

axle

Are there specific maintenance tips to extend the lifespan of my vehicle’s axles?

Maintaining the axles of your vehicle is crucial for ensuring their longevity, performance, and overall safety. Here are some specific maintenance tips to extend the lifespan of your vehicle’s axles:

Regular Inspection:

Perform regular visual inspections of the axles to check for any signs of damage, leaks, or excessive wear. Look for cracks, bends, or rust on the axle housing, and inspect the axle shafts, seals, and boots. Early detection of issues can help prevent further damage and costly repairs.

Lubrication:

Follow the manufacturer’s recommendations for axle lubrication. Proper lubrication helps reduce friction and wear on the axle components. Regularly check the axle’s lubricant level and quality, and replace it as necessary. Use the recommended lubricant type and viscosity for your specific axle.

Seal Inspection and Replacement:

Check the axle seals for any signs of leaks, such as fluid accumulation around the axle ends. Leaking seals can allow contaminants to enter the axle assembly, leading to premature wear and damage. Replace worn or damaged seals promptly to maintain proper lubrication and prevent contamination.

Proper Loading and Towing:

Ensure that you do not exceed the weight capacity of your vehicle’s axles. Overloading or towing beyond the recommended limits can put excessive stress on the axles, leading to premature wear or failure. Be mindful of the payload and towing capacity specified by the vehicle manufacturer.

Driving Techniques:

Adopt proper driving techniques to minimize stress on the axles. Avoid sudden acceleration, aggressive cornering, and harsh braking, as these actions can subject the axles to excessive forces. Additionally, be cautious when driving over rough terrain or obstacles to prevent impacts that could damage the axles.

Regular Wheel Alignment:

Maintain proper wheel alignment to prevent excessive strain on the axles. Misaligned wheels can put uneven loads on the axles, leading to accelerated wear. Regularly check and adjust the wheel alignment as per the manufacturer’s recommendations.

Proper Tire Inflation:

Ensure that your vehicle’s tires are properly inflated according to the recommended tire pressure. Underinflated or overinflated tires can affect the load distribution on the axles and increase the risk of axle damage. Regularly check and maintain the correct tire pressure.

Service Intervals:

Follow the recommended service intervals for your vehicle, which may include axle inspections, lubricant changes, and other maintenance tasks. Adhering to these intervals ensures that the axles are properly maintained and any potential issues are addressed in a timely manner.

It’s important to consult your vehicle’s owner’s manual for specific maintenance guidelines and intervals provided by the manufacturer. Additionally, if you notice any unusual noises, vibrations, or handling issues related to the axles, it is advisable to have your vehicle inspected by a qualified mechanic to identify and address any potential axle problems promptly.

axle

Can you explain the importance of axle alignment for vehicle stability and handling?

Tire Wear and Longevity:

Optimal Traction:

Steering Response and Stability:

Reduced Rolling Resistance:

Vehicle Safety:

<img src="https://img.hzpt.com/img/axles_shaft_coupling_Spline/spline_shaft_l1.webp" alt="China Best Sales China Factory Trailer Rear Axle Heavy Truck Trailer Steering Axle Auto Parts Manufacture Trailer Parts 12t/13t/16t Trailer Axle a wheel and axle simple machine”><img src="https://img.hzpt.com/img/axles_shaft_coupling_Spline/spline_shaft_l2.webp" alt="China Best Sales China Factory Trailer Rear Axle Heavy Truck Trailer Steering Axle Auto Parts Manufacture Trailer Parts 12t/13t/16t Trailer Axle a wheel and axle simple machine”>
editor by lmc 2024-11-04

China manufacturer Hot Selling Chinese Bus Spare Parts Axle φ 335, φ 280.8 Front and Rear Wheel Hub 3103-00804/3104-00748 for CZPT Bus axle assembly

Product Description

product name	wheel hub
Product number	3104-00748/3104-00804
Specification	standard
Material	Metal
performance	hight
Application classification	axle system
Applicable models	Yutong/zhongtong/haige bus
Origin	China
Package	Carton
Transportation method	According to customer requirements

Detailed Photos

Product material number

3103-00038	3103-00170	3103-00191	3103-00199	3103-5712	3103-00302
3103-0571	3103-00461	3103-0 0571	3103-0571	3103-571	3103-0571
3103-0571	3103-00607	3103-00617	3103-00639	3103-00644	3103-00688
3103-00709	3103-0 0571	3103-0 0571	3103-00802	3103-00804	3103-00806
3103-0571	3103-00942	3103-0571	3103-57166	3103-57170	3103-57173
3103-57178	3103-01120	3103-01140	3103-01213	3103-01283	3103-01374
3103-01377	3103-01378	3104-00012	3104-00014	3104-00016	3104-00038
3104-00090	3104-00099	3104-00126	3104-00141	3104-00143	3104-00149
3104-00152	3104-00154	3104-00156	3104-00169	3104-00186	3104-05714
3104-5714	3104-5717	3104-5719	3104-5710	3104-00303	3104-00337
3104-00338	3104-0 0571	3104-00386	3104-00387	3104-00404	3104-00405
3104-00406	3104-00407	3104-00409	3104-00420	3104-00426	3104-00428
3104-0571	3104-00430	3104-0571	3104-571	3104-0571	3104-00450
3104-00488	3104-00504	3104-0571	3104-0571	3104-0571	3104-0571
3104-571	3104-0571	3104-571	3104-0 0571	3104-0571	3104-0571
3104-00617	3104-0 0571	3104-00642	3104-00649	3104-00656	3104-0571
3104-0571	3104-0571	3104-00725	3104-0571	3104-00748	3104-0571
3104-00761	3104-00765	3104-00781	3104-571	3104-0571	3104-571
3104-0571	3104-571	3104-00924	3104-00965	3104-00986	3104-0571
3104-57109	3104-57123	3104-57168	3104-57170	3104-57171	3104-01101
3104-01135	3104-01186	3104-01221	3104-01226	3104-01229	3104-01412
3104-01479	3104-01590	3104-01597	3104-01598	3502-0571	3502-571
3503-00083	3503-5713	3503-00124	3503-00127	3503-00158	3503-00387
3503-00449

10038148	2257120030-B	2400-87-91100	24V470571*04001
31571R004	31VB1- 0571 3	9100-90-01324

Shipping scenario

Our Advantages

Company Profile

FAQ

Q3. What are your payment terms?
A: T/T 30% as deposit, 70% before delivery. Photos of the product and packaging will be shown to you before the balance is paid.

Q4 How is your delivery time?
A: Generally, it takes 30 days after receiving the advance payment.
The specific delivery time depends on the items and quantity of the order.

Q5. Can you produce according to samples?
A: Yes, it can be developed according to your samples or technical drawings.

Q6. Do you test all goods before delivery?
A: Yes, 100% tested before delivery.

Please send me an email and give me a chance to serve you! Thanks!
Have a good day!

/* May 10, 2571 16:49:51 */!function(){function d(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

axle hub

Can you recommend reliable brands for purchasing replacement axle hubs?

When it comes to purchasing replacement axle hubs, there are several reliable brands known for their quality and durability. Here are some recommended brands:

Timken: Timken is a well-known brand that specializes in manufacturing high-quality bearings and hub assemblies. They have a reputation for producing reliable and long-lasting products. Timken axle hubs are widely used in the automotive industry and are trusted by both professionals and DIY enthusiasts.
Moog: Moog is another reputable brand that offers a wide range of suspension and steering components, including axle hubs. Moog axle hubs are known for their precision engineering, excellent build quality, and reliable performance. They are designed to meet or exceed OEM (Original Equipment Manufacturer) specifications and are a popular choice among car owners.
ACDelco: ACDelco is a trusted brand that provides a comprehensive range of automotive replacement parts. Their axle hubs are designed to deliver reliable performance and durability. ACDelco axle hubs are often recommended for their compatibility with various vehicle makes and models, making them a reliable choice for replacement.
SKF: SKF is a well-established brand with a strong reputation in the automotive industry. They are known for their high-quality bearings and hub assemblies, including axle hubs. SKF axle hubs are engineered to provide excellent performance and longevity. They are often regarded as a premium option for those seeking reliable replacement parts.
NTN: NTN is a trusted manufacturer of bearings and hub assemblies. They offer a range of axle hubs that are designed to meet stringent quality standards. NTN axle hubs are known for their durability and precise fitment, making them a reliable choice for replacement in various vehicles.

axle hub

How often should axle hubs be inspected and replaced as part of routine vehicle maintenance?

Manufacturer’s recommendations: The first and most reliable source of information regarding the inspection and replacement intervals for axle hubs is the vehicle manufacturer’s recommendations. These can usually be found in the owner’s manual or the manufacturer’s maintenance schedule. It is essential to follow these guidelines as they are specific to your particular vehicle.
Driving conditions: If your vehicle is subjected to severe driving conditions, such as frequent towing, off-road use, or driving in extreme temperatures, the axle hubs may experience increased stress and wear. In such cases, more frequent inspections and maintenance may be necessary.
Visual inspection: It is a good practice to visually inspect the axle hubs during routine maintenance or when performing other maintenance tasks, such as changing the brakes or rotating the tires. Look for any signs of damage, such as leaks, excessive play, or worn-out components. If any abnormalities are detected, further inspection or replacement may be required.
Wheel bearing maintenance: The axle hubs house the wheel bearings, which are critical for the smooth rotation of the wheels. Some vehicles have serviceable wheel bearings that require periodic maintenance, such as cleaning and repacking with fresh grease. If your vehicle has serviceable wheel bearings, refer to the manufacturer’s recommendations for the appropriate maintenance intervals.
Unusual noises or vibrations: If you notice any unusual noises, such as grinding, humming, or clicking sounds coming from the wheels, or if you experience vibrations while driving, it could be an indication of a problem with the axle hubs. In such cases, immediate inspection and necessary repairs or replacement should be performed.

axle hub

Are there any recalls or common issues associated with specific axle hub models?

Recalls and common issues can occur with specific axle hub models due to manufacturing defects, design flaws, or other factors. Here’s a detailed explanation:

It’s important to note that specific recalls and common issues can vary depending on the make, model, and year of the vehicle, as well as the specific axle hub manufacturer. Manufacturers and regulatory bodies such as the National Highway Traffic Safety Administration (NHTSA) monitor and address safety concerns related to axle hubs through recalls and investigations.

Recalls are typically initiated by the vehicle manufacturer or the axle hub manufacturer in response to identified safety defects or non-compliance with safety standards. Recalls aim to address the issues and rectify any potential safety risks associated with the axle hub models. They may involve inspections, repairs, or replacements of the affected components.

To determine if there are any recalls or common issues associated with specific axle hub models, it is recommended to check the following sources:

Manufacturer’s Website: Visit the official website of the vehicle manufacturer or the axle hub manufacturer. They often provide information on recalls, technical service bulletins (TSBs), and common issues related to their products. Look for any relevant information specific to the axle hub models in question.
NHTSA Website: The NHTSA maintains a comprehensive database of recalls and investigations related to vehicle components, including axle hubs. Their website allows users to search for recalls and investigations by specific make, model, and component. You can use their search tool to check if there are any recalls or investigations associated with the axle hub models of interest.
Owner Forums and Online Communities: Online forums and communities dedicated to specific vehicle makes and models can be a valuable source of information. Owners often share their experiences, including common issues they have encountered with axle hub models. It’s important to consider multiple sources and exercise caution when relying on anecdotal information.
Service Centers and Mechanics: Local service centers and mechanics who specialize in the specific vehicle make or have experience with the axle hub models in question may be aware of any recalls or common issues. They can provide insights based on their firsthand knowledge and experience.

By consulting these sources, you can gather information about any recalls or common issues associated with specific axle hub models. If any recalls or safety concerns are identified, it is recommended to contact the vehicle manufacturer or a certified dealership to inquire about the necessary actions, such as inspections or repairs, to address the issues.

In summary, recalls and common issues can occur with specific axle hub models. Checking the manufacturer’s website, the NHTSA website, owner forums, and consulting with service centers and mechanics can provide valuable information regarding any recalls or common issues associated with the axle hub models of interest. It’s important to stay informed and take appropriate actions to address any identified safety concerns.

<img src="https://img.hzpt.com/img/axles_shaft_coupling_Spline/spline_shaft_l1.webp" alt="China manufacturer Hot Selling Chinese Bus Spare Parts Axle φ 335, φ 280.8 Front and Rear Wheel Hub 3103-00804/3104-00748 for CZPT Bus axle assembly”><img src="https://img.hzpt.com/img/axles_shaft_coupling_Spline/spline_shaft_l2.webp" alt="China manufacturer Hot Selling Chinese Bus Spare Parts Axle φ 335, φ 280.8 Front and Rear Wheel Hub 3103-00804/3104-00748 for CZPT Bus axle assembly”>
editor by lmc 2024-11-04

China Professional CHINAMFG Rear Axle Wheel Hub Bearing Assembly 42450-33030 for CHINAMFG Camry with Good quality

China Professional CHINAMFG Rear Axle Wheel Hub Bearing Assembly 42450-33030 for CHINAMFG Camry

Product Description

This rear axle wheel hub bearing assembly is a high-quality and durable auto part specifically designed for CHINAMFG Camry cars. It is made of high-quality steel material and is 100% tested for quality assurance before shipment. The product is available in neutral packing or can be customized with the client’s brand packing.

The MOQ for this product is 100PCS and comes with a guarantee of 30,000 kms/1 Year. The delivery time for small quantities is typically 20-35 days, and around 35-50 days for large quantities.

Specifications:

Catagory	CHINAMFG Wheel Hub
Application	Auto Transmission Systems
Position	Front
Material	Steel
Sample	Available
MOQ	100PCS
Guarantee	30,000 kms/1 Year
Quality	100% Tested 1 by 1 before shipment
Package	Neutral Packing & Client’s Brand Packing
Delivery	20-35 days for small quantities, and about 35-50 days for large quantities.

Brake Hub Drum Disc for Trailer

Frequently Asked Questions:

1. What is the MOQ for this product?

The MOQ for this product is 100PCS.

2. What is the guarantee for this product?

The guarantee for this product is 30,000 kms/1 Year.

3. How long does it take for delivery?

The delivery time is 20-35 days for small quantities, and about 35-50 days for large quantities.

4. Can I customize the packing?

Yes, the product comes in neutral packing or can be customized with the client’s brand packing. You need to provide us with your certificate of trademark registration and authorization paper.

5. What is the quality assurance for this product?

This product is made of high-quality steel material and is 100% tested for quality assurance before shipment.

Other Products and Businesses

In addition to this high-quality auto part, our company also supplies a wide range of industrial products, including agricultural gearboxes, power output shafts, sprockets, hydraulic couplings, worm gear reducers, racks, roller chains, pulleys, planetary gearboxes, timing pulleys, bushings, and more. We offer high-quality products, preferential prices, and thoughtful services to all our customers. Customers are welcome to customize their orders with drawings and samples.

Performance Characteristics of Axle Hub

Axle hub is an essential component of the wheel assembly of a vehicle and has several performance characteristics. Firstly, it is responsible for holding the wheel bearing together and ensuring that it spins smoothly. Secondly, the axle hub helps in the smooth transfer of torque from the axle shaft to the wheel. Thirdly, it plays a crucial role in supporting the weight of the vehicle, thus providing stability and balance. Fourthly, it helps in reducing the heat generated due to friction, thereby preventing the brake system from overheating and ensuring proper functioning.

Types and Characteristics of Axle Hub

There are two main types of axle hubs: front and rear. Front axle hubs are located at the front wheels, while the rear axle hubs are located at the rear wheels. Axle hubs can also be classified based on their material composition, such as cast iron, steel, and aluminum. Cast iron axle hubs are durable and can withstand high loads, while steel and aluminum axle hubs are lightweight and provide better fuel efficiency. Moreover, axle hubs can be either shielded or sealed, depending on their intended use.

Advantages of Axle Hub made of Different Materials

Axle hubs made of cast iron have excellent strength and durability, making them suitable for heavy-duty applications. Steel axle hubs are lightweight and offer better fuel efficiency and are ideal for light-duty applications. Aluminum axle hubs are corrosion-resistant, lightweight, and offer excellent heat dissipation, making them suitable for racing cars. Additionally, aluminum axle hubs are environmentally friendly, as they can be easily recycled.

Application of Axle Hub in Various Industries

Axle hub finds its application in various industries, such as the Automotive Industry, Heavy Machinery, Transportation, Rail Industry, and Marine Applications. In the Automotive industry, axle hubs are used in passenger cars, trucks, and buses. In Heavy Machinery, axle hubs are used in construction equipment, cranes, and forklifts. In the Rail Industry, axle hubs are used in locomotives, passenger cars, and freight cars. In Marine Applications, axle hubs are used in boats, ships, and other marine vessels.

Future Development Trends and Opportunities of Axle Hub Products

The future of Axle hub products is bright, driven by the growing demand for fuel-efficient and environmentally friendly vehicles. The increasing demand for electric vehicles and the need for lightweight materials in the automotive industry are expected to drive the demand for aluminum axle hubs. The development of high-strength materials and advanced manufacturing techniques is expected to drive the growth of cast iron and steel axle hubs.

How to Choose a Suitable Axle Hub

Choosing a suitable axle hub is crucial for ensuring the smooth functioning of the vehicle. Several factors need to be considered while selecting an axle hub, such as Load Capacity, Size and Specifications, Material, Bearing Type, Operating Environment, and Installation Method. The load capacity of the axle hub should be sufficient to support the weight of the vehicle. The size and specifications of the axle hub should be compatible with the vehicle’s wheel assembly. The material of the axle hub should be selected based on the intended use and environmental conditions. The bearing type should be selected based on the load capacity and operating environment. The installation method should be compatible with the vehicle’s axle shaft.

Summary

In summary, axle hub is an essential component of the wheel assembly of a vehicle and has several performance characteristics. There are two main types of axle hubs, front and rear, and they can be classified based on their material composition. Axle hubs find their application in various industries, such as the Automotive Industry, Heavy Machinery, Transportation, Rail Industry, and Marine Applications. The future of Axle hub products is bright, driven by the growing demand for fuel-efficient and environmentally friendly vehicles. Choosing a suitable axle hub is crucial for ensuring the smooth functioning of the vehicle.

Author: Dream

All the content of this page is from the Internet. The content is only as a reference for product selection. Our products are replacement parts and not original spare parts. We are not the holder of the original trademarks of the content. Our products are only suitable for after-sales replacement parts and not original spare parts. Our replacement parts can be perfectly adapted to the original spare parts. If you need to buy original spare parts, please contact the original factory to buy. If you want to buy original spare parts, please contact the original supplier for purchase.

China Best Sales All Kind of Trailer Axle Hub for Trailer Axle mini air compressor

Trailer Axle Hub – China’s Best Sales

Product Description

Our trailer axle hub is designed with specific heat-treat low-alloy steel axle beams that have good synthetic performance, strong load ability, and lower self-weight. The high-quality alloy CHINAMFG inserted spindle provides superior fatigue capability. The trailer axle hub also features high-performance premium non-asbestos brake linings that extend the service life.

Installation is also simplified as the trailer axle hub is easy to fit with an ABS system. The camshaft comes equipped with matching seals that ensure no entry of grease into the brake drum, making it safer to use. The new tight-fit hub cap has O-rings that are highly effective in sealing.

The grease lubricant is supplied by Mobil, lengthening the time of free maintenance. The full range of stud fixing, such as ISO, BSF, and JAP, can meet the requirements of various wheel rims. We have faithfully followed the stipulations of ISO9001:2015 certification and ISO/TS16949, which guarantee high product quality.

Product Parameters

Products name	Type
Germany type hub	16t
Hub	786222
Hub	3601B
Hub	Thailand type hub
Hub	ZM

Trailer Axle Hub Image

FAQ

Q1: How long has your company been producing axles?

A: Our company has been producing axles for over 10 years and has sold them to many countries.

Q2: What is the delivery time for your products?

A: In general, the delivery time is 15-20 days. We will make the delivery as soon as possible with guaranteed quality.

Q3: What payment methods are accepted?

A: L/C, T/T, Unionpay, and DP are accepted. If you have a better idea, please feel free to share it with us.

Q4: Which type of shipping is recommended?

A: Generally, we recommend sea transportation for its cheap and safe superiorities. However, we respect your views on other transportation types as well.

Q5: What other products does your company offer?

A: Our company mainly supplies various industrial products such as agricultural gearboxes, power output shafts, sprockets, hydraulic couplings, worm gear reducers, racks, roller chains, pulleys, planetary gearboxes, timing pulleys, bushings, and more. We offer high-quality products, preferential prices, and thoughtful services and welcome customers to customize with drawings and samples.